TELESTE-COMMON-MIB :: sWUpdateControl

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TELESTE-COMMON-MIB › sWUpdateControl

sWUpdateControl

Module: TELESTE-COMMON-MIB

OID (symbolic): TELESTE-COMMON-MIB::sWUpdateControl

OID (numeric): 1.3.6.1.4.1.3715.99.2.3.2.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Writing value updateStart(4) commands the module to run a software update. The software image location and file name are specified in sWUpdateURL and sWUpdateFilename.

Writing a updateIdle(1) when the update is running will terminate the update process immediately. Writing any value when no update is runnign has no effect.

Reading this object returns either updateIdle(1), updateRunning(2) or updateFailed(3) depending on the status of the (last) software update.

What is sWUpdateControl?

Controls a software update on this module: write updateStart(4) to begin an update using the file/URL configured in sWUpdateFileName and sWUpdateURL, or updateIdle(1) to cancel one in progress. Reading it reports updateIdle, updateRunning, or updateFailed depending on the last update's outcome, so poll it after starting an update to confirm success.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3715.99.2.3.2.1.1
snmpwalk -v2c -c public <target> TELESTE-COMMON-MIB::sWUpdateControl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3715.99.2.3.2.1.1.1
snmpget -v2c -c public <target> TELESTE-COMMON-MIB::sWUpdateControl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.3715.99.2.3.2.1.1.1 i <value>

Start monitoring Teleste cable TV/broadband headend equipment (shared identity/aggregated alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELESTE-COMMON-MIB::sWUpdateControl OID value, configure state conditions and alerts, and monitor any Teleste cable TV/broadband headend equipment (shared identity/aggregated alarm status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3715telesteTELESTE-ROOT-MIB
1.3.6.1.4.1.3715.99commonTELESTE-ROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3715.99.2.3moduleControlTELESTE-COMMON-MIB
1.3.6.1.4.1.3715.99.2.3.2moduleSWUpdateTableTELESTE-COMMON-MIB
1.3.6.1.4.1.3715.99.2.3.2.1moduleSWUpdateEntryTELESTE-COMMON-MIB
1.3.6.1.4.1.3715.99.2.3.2.1.1sWUpdateControlTELESTE-COMMON-MIB