TELDAT-TRAP-ETH-MIB :: ethNotification45

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TELDAT-TRAP-ETH-MIB › ethNotification45

ethNotification45

Module: TELDAT-TRAP-ETH-MIB

OID (symbolic): TELDAT-TRAP-ETH-MIB::ethNotification45

OID (numeric): 1.3.6.1.4.1.2007.1.4.81.2.0.45

Node type: NOTIFICATION-TYPE

Description: Notification of Event ETH.45

Message: 'Ethernet self-test phase $1 failed: $2 interface $3'

Parameters list: $1: eth45-selftest-phase $2: eth45-error-condition $3: eth45-interface

The selftest for the Ethernet card has reported an error during selftest. The phases are: 'Reset board', 'Check reset done', 'Check reset delay', 'Init SCB', 'Init SCB delay', 'Init SCB completion', 'Read hardware address', 'Set bus throttle timers', 'Internal loopback', 'Set hardware address', 'Enable receive', 'Internal loopback (output)', 'Check internal loopback data', 'External loopback', 'External loopback delay', 'External loopback (output)', 'Check External loopback data', 'Network loopback', 'Network loopback', Network loopback delay', 'Network loopback (output)', 'Check network looback data', 'Clear loopback' and 'Operational test'.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' TELDAT-TRAP-ETH-MIB::ethNotification45
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.2007.1.4.81.2.0.45

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:53555->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (360327475) 41 days, 16:54:34.75
  SNMPv2-MIB::snmpTrapOID.0 = OID: TELDAT-TRAP-ETH-MIB::ethNotification45

Start monitoring Teldat router (Ethernet frame anomaly/length-mismatch event traps) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELDAT-TRAP-ETH-MIB::ethNotification45 OID value, configure state conditions and alerts, and monitor any Teldat router (Ethernet frame anomaly/length-mismatch event traps) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2007teldatTELDAT-MIB
1.3.6.1.4.1.2007.1teladminTELDAT-MIB
1.3.6.1.4.1.2007.1.4telEventTrapsTELDAT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2007.1.4.81ethTrapsMIBTELDAT-TRAP-ETH-MIB
1.3.6.1.4.1.2007.1.4.81.2ethNotificationsTELDAT-TRAP-ETH-MIB
1.3.6.1.4.1.2007.1.4.81.2.0ethNotificationsPrefixTELDAT-TRAP-ETH-MIB
1.3.6.1.4.1.2007.1.4.81.2.0.45ethNotification45TELDAT-TRAP-ETH-MIB