All MIBs › TELDAT-MON-FEATURES-NSM-MIB › teldatNsmStatsCollectSequenceErrors
teldatNsmStatsCollectSequenceErrors
Module: TELDAT-MON-FEATURES-NSM-MIB
OID (symbolic): TELDAT-MON-FEATURES-NSM-MIB::teldatNsmStatsCollectSequenceErrors
OID (numeric): 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.6
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: When the NsmRttType is 'echo' this is the number of RTT (NSM) operation completions received with an unexpected sequence identifier. For all other values of NsmRttType this object will remain zero.
When this has occurred some of the possible reasons may be: - a duplicate packet was received - a response was received after it had timed-out - a corrupted packet was received and was not detected
The completion time of these operations are not accumulated, nor do they increment teldatNsmStatsCaptureCompletions.
This object has the special behavior as defined by the ROLLOVER NOTE in the DESCRIPTION of the teldatNsmMonMIB object.
What is teldatNsmStatsCollectSequenceErrors?
For echo-type probes, count of completions received with an unexpected sequence identifier in the current hourly statistics group -- typically a duplicate, a late arrival after timeout, or a corrupted packet; always 0 for other probe types.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.6 snmpwalk -v2c -c public <target> TELDAT-MON-FEATURES-NSM-MIB::teldatNsmStatsCollectSequenceErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.6.1 snmpget -v2c -c public <target> TELDAT-MON-FEATURES-NSM-MIB::teldatNsmStatsCollectSequenceErrors.1
Start monitoring Teldat router/WAN-edge router (Network Service Monitor RTT probe status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELDAT-MON-FEATURES-NSM-MIB::teldatNsmStatsCollectSequenceErrors OID value, configure state conditions and alerts, and monitor any Teldat router/WAN-edge router (Network Service Monitor RTT probe status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2007 | teldat | TELDAT-MIB |
| 1.3.6.1.4.1.2007.4 | telproducts | TELDAT-MIB |
| 1.3.6.1.4.1.2007.4.1 | telProductsNucleox | TELDAT-SW-STRUCTURE-MIB |
| 1.3.6.1.4.1.2007.4.1.2 | telProductsNpMonit | TELDAT-SW-STRUCTURE-MIB |
| 1.3.6.1.4.1.2007.4.1.2.4 | telProdNpMonFeatures | TELDAT-SW-STRUCTURE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2007.4.1.2.4.6 | teldatNsmMonMIB | TELDAT-MON-FEATURES-NSM-MIB |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1 | teldatNsmObjects | TELDAT-MON-FEATURES-NSM-MIB |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3 | teldatNsmStats | TELDAT-MON-FEATURES-NSM-MIB |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2 | teldatNsmStatsCollectTable | TELDAT-MON-FEATURES-NSM-MIB |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1 | teldatNsmStatsCollectEntry | TELDAT-MON-FEATURES-NSM-MIB |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.6 | teldatNsmStatsCollectSequenceErrors | TELDAT-MON-FEATURES-NSM-MIB |