TELDAT-MON-FEATURES-NSM-MIB :: teldatNsmStatsCollectNoConnections

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TELDAT-MON-FEATURES-NSM-MIB › teldatNsmStatsCollectNoConnections

teldatNsmStatsCollectNoConnections

Module: TELDAT-MON-FEATURES-NSM-MIB

OID (symbolic): TELDAT-MON-FEATURES-NSM-MIB::teldatNsmStatsCollectNoConnections

OID (numeric): 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.4

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: When the NsmRttType is 'echo' this is the number of occasions when a RTT (NSM) operation could not be initiated because the connection to the target has not been established. For all other NsmRttTypes this object will remain zero.

This cannot occur for connectionless protocols, but may occur for connection oriented protocols (such as SNA).

Since a RTT (NSM) operation was never initiated, the completion time of these operations are not accumulated, nor do they increment teldatNsmStatsCaptureCompletions.

If this error occurs, it will be accumulated in the source to target path, the only which always exists.

This object has the special behavior as defined by the ROLLOVER NOTE in the DESCRIPTION of the teldatNsmMonMIB object.

What is teldatNsmStatsCollectNoConnections?

For echo-type probes, count of times an RTT operation couldn't even be started because no connection to the target existed yet, in the current hourly statistics group; always 0 for connectionless probe types.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.4
snmpwalk -v2c -c public <target> TELDAT-MON-FEATURES-NSM-MIB::teldatNsmStatsCollectNoConnections

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.4.1
snmpget -v2c -c public <target> TELDAT-MON-FEATURES-NSM-MIB::teldatNsmStatsCollectNoConnections.1

Start monitoring Teldat router/WAN-edge router (Network Service Monitor RTT probe status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELDAT-MON-FEATURES-NSM-MIB::teldatNsmStatsCollectNoConnections OID value, configure state conditions and alerts, and monitor any Teldat router/WAN-edge router (Network Service Monitor RTT probe status) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2007teldatTELDAT-MIB
1.3.6.1.4.1.2007.4telproductsTELDAT-MIB
1.3.6.1.4.1.2007.4.1telProductsNucleoxTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.2telProductsNpMonitTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.2.4telProdNpMonFeaturesTELDAT-SW-STRUCTURE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2007.4.1.2.4.6teldatNsmMonMIBTELDAT-MON-FEATURES-NSM-MIB
1.3.6.1.4.1.2007.4.1.2.4.6.1teldatNsmObjectsTELDAT-MON-FEATURES-NSM-MIB
1.3.6.1.4.1.2007.4.1.2.4.6.1.3teldatNsmStatsTELDAT-MON-FEATURES-NSM-MIB
1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2teldatNsmStatsCollectTableTELDAT-MON-FEATURES-NSM-MIB
1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1teldatNsmStatsCollectEntryTELDAT-MON-FEATURES-NSM-MIB
1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.4teldatNsmStatsCollectNoConnectionsTELDAT-MON-FEATURES-NSM-MIB