TELDAT-MON-FEATURES-NSM-MIB :: teldatNsmStatsCollectDrops

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TELDAT-MON-FEATURES-NSM-MIB › teldatNsmStatsCollectDrops

teldatNsmStatsCollectDrops

Module: TELDAT-MON-FEATURES-NSM-MIB

OID (symbolic): TELDAT-MON-FEATURES-NSM-MIB::teldatNsmStatsCollectDrops

OID (numeric): 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.5

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: The number of occasions when a RTT (NSM) operation could not be initiated because some necessary internal resource (for example memory) was not available, or the operation completion could not be recognized.

Since a RTT (NSM) operation was never initiated or was not recognized, the completion time of these operations are not accumulated, nor do they increment teldatNsmStatsCaptureCompletions.

This error will be accumulated in the source to target path, the only which always exists.

This object has the special behavior as defined by the ROLLOVER NOTE in the DESCRIPTION of the teldatNsmMonMIB object.

What is teldatNsmStatsCollectDrops?

Count of times an RTT operation couldn't be started, or its completion couldn't be recognized, because of an internal resource shortage (e.g. memory), in the current hourly statistics group.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.5
snmpwalk -v2c -c public <target> TELDAT-MON-FEATURES-NSM-MIB::teldatNsmStatsCollectDrops

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.5.1
snmpget -v2c -c public <target> TELDAT-MON-FEATURES-NSM-MIB::teldatNsmStatsCollectDrops.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> teldatNsmStatsCollectDrops.1

Start monitoring Teldat router/WAN-edge router (Network Service Monitor RTT probe status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELDAT-MON-FEATURES-NSM-MIB::teldatNsmStatsCollectDrops OID value, configure state conditions and alerts, and monitor any Teldat router/WAN-edge router (Network Service Monitor RTT probe status) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2007teldatTELDAT-MIB
1.3.6.1.4.1.2007.4telproductsTELDAT-MIB
1.3.6.1.4.1.2007.4.1telProductsNucleoxTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.2telProductsNpMonitTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.2.4telProdNpMonFeaturesTELDAT-SW-STRUCTURE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2007.4.1.2.4.6teldatNsmMonMIBTELDAT-MON-FEATURES-NSM-MIB
1.3.6.1.4.1.2007.4.1.2.4.6.1teldatNsmObjectsTELDAT-MON-FEATURES-NSM-MIB
1.3.6.1.4.1.2007.4.1.2.4.6.1.3teldatNsmStatsTELDAT-MON-FEATURES-NSM-MIB
1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2teldatNsmStatsCollectTableTELDAT-MON-FEATURES-NSM-MIB
1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1teldatNsmStatsCollectEntryTELDAT-MON-FEATURES-NSM-MIB
1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.5teldatNsmStatsCollectDropsTELDAT-MON-FEATURES-NSM-MIB