TELDAT-MON-FEATURES-NSM-MIB :: teldatNsmStatsCollectBusies

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TELDAT-MON-FEATURES-NSM-MIB › teldatNsmStatsCollectBusies

teldatNsmStatsCollectBusies

Module: TELDAT-MON-FEATURES-NSM-MIB

OID (symbolic): TELDAT-MON-FEATURES-NSM-MIB::teldatNsmStatsCollectBusies

OID (numeric): 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.3

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: The number of occasions when a RTT (NSM) operation could not be initiated because a previous RTT (NSM) operation has not been completed.

When the initiation of a new operation cannot be started, this object will be incremented and the operation will be omitted. (The next operation will start at the next Frequency). Since a RTT (NSM) operation was never initiated, the completion time of these operations is not accumulated, nor do they increment teldatNsmStatsCaptureCompletions.

This error will be accumulated in the source to target path, the only will always exists.

This object has the special behavior as defined by the ROLLOVER NOTE in the DESCRIPTION of the teldatNsmMonMIB object.

What is teldatNsmStatsCollectBusies?

Count of times a new RTT operation could not be started because the previous one for this probe hadn't finished yet, in the current hourly statistics group -- a sign that teldatNsmCtrlAdminFrequency is set too aggressively for how long the probe actually takes.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.3
snmpwalk -v2c -c public <target> TELDAT-MON-FEATURES-NSM-MIB::teldatNsmStatsCollectBusies

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.3.1
snmpget -v2c -c public <target> TELDAT-MON-FEATURES-NSM-MIB::teldatNsmStatsCollectBusies.1

Start monitoring Teldat router/WAN-edge router (Network Service Monitor RTT probe status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELDAT-MON-FEATURES-NSM-MIB::teldatNsmStatsCollectBusies OID value, configure state conditions and alerts, and monitor any Teldat router/WAN-edge router (Network Service Monitor RTT probe status) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2007teldatTELDAT-MIB
1.3.6.1.4.1.2007.4telproductsTELDAT-MIB
1.3.6.1.4.1.2007.4.1telProductsNucleoxTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.2telProductsNpMonitTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.2.4telProdNpMonFeaturesTELDAT-SW-STRUCTURE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2007.4.1.2.4.6teldatNsmMonMIBTELDAT-MON-FEATURES-NSM-MIB
1.3.6.1.4.1.2007.4.1.2.4.6.1teldatNsmObjectsTELDAT-MON-FEATURES-NSM-MIB
1.3.6.1.4.1.2007.4.1.2.4.6.1.3teldatNsmStatsTELDAT-MON-FEATURES-NSM-MIB
1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2teldatNsmStatsCollectTableTELDAT-MON-FEATURES-NSM-MIB
1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1teldatNsmStatsCollectEntryTELDAT-MON-FEATURES-NSM-MIB
1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.3teldatNsmStatsCollectBusiesTELDAT-MON-FEATURES-NSM-MIB