All MIBs › TELDAT-CFG-INTERF-IEC101GW-MIB › telProdNpIec101GWIfcMultilink
telProdNpIec101GWIfcMultilink
Module: TELDAT-CFG-INTERF-IEC101GW-MIB
OID (symbolic): TELDAT-CFG-INTERF-IEC101GW-MIB::telProdNpIec101GWIfcMultilink
OID (numeric): 1.3.6.1.4.1.2007.4.1.1.4.16.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable RTU's multilink mode.
What is telProdNpIec101GWIfcMultilink?
This object enables or disables multilink mode for RTUs on this IEC-101 gateway interface, allowing multiple RTUs to share the same serial line distinguished by link address. Admins enable it when several RTUs are daisy-chained on one serial port rather than each RTU having its own dedicated line. For example, setting this to enabled(1) lets the interface manage several RTUs configured in the telProdNpIec101GWIfcRtuTable over a shared serial link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.1.4.16.1.1.7 snmpwalk -v2c -c public <target> TELDAT-CFG-INTERF-IEC101GW-MIB::telProdNpIec101GWIfcMultilink
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.1.4.16.1.1.7.1 snmpget -v2c -c public <target> TELDAT-CFG-INTERF-IEC101GW-MIB::telProdNpIec101GWIfcMultilink.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2007.4.1.1.4.16.1.1.7.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> telProdNpIec101GWIfcMultilink.1
Start monitoring Teldat router configured as IEC 60870-5-101 SCADA protocol gateway (serial-link config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELDAT-CFG-INTERF-IEC101GW-MIB::telProdNpIec101GWIfcMultilink OID value, configure state conditions and alerts, and monitor any Teldat router configured as IEC 60870-5-101 SCADA protocol gateway (serial-link config status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2007 | teldat | TELDAT-MIB |
| 1.3.6.1.4.1.2007.4 | telproducts | TELDAT-MIB |
| 1.3.6.1.4.1.2007.4.1 | telProductsNucleox | TELDAT-SW-STRUCTURE-MIB |
| 1.3.6.1.4.1.2007.4.1.1 | telProductsNpConfig | TELDAT-SW-STRUCTURE-MIB |
| 1.3.6.1.4.1.2007.4.1.1.4 | telProdNpConfInterface | TELDAT-SW-STRUCTURE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2007.4.1.1.4.16 | telProdNpConfInterfIec101GW | TELDAT-CFG-INTERF-IEC101GW-MIB |
| 1.3.6.1.4.1.2007.4.1.1.4.16.1 | telProdNpIec101GWTable | TELDAT-CFG-INTERF-IEC101GW-MIB |
| 1.3.6.1.4.1.2007.4.1.1.4.16.1.1 | telProdNpIec101GWEntry | TELDAT-CFG-INTERF-IEC101GW-MIB |
| 1.3.6.1.4.1.2007.4.1.1.4.16.1.1.7 | telProdNpIec101GWIfcMultilink | TELDAT-CFG-INTERF-IEC101GW-MIB |