All MIBs › TE-MIB › teNextTunnelIndex
teNextTunnelIndex
Module: TE-MIB
OID (symbolic): TE-MIB::teNextTunnelIndex
OID (numeric): 1.3.6.1.2.1.122.1.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: An integer that may be used as a new Index in the
teTunnelTable.
The special value of 0 indicates that no more new entries can be created in that table.
When this MIB module is used for configuration, this object always contains a legal value (if non-zero) for an index that is not currently used in that table. The Command Generator (Network Management Application) reads this variable and uses the (non-zero) value read when creating a new row with an SNMP SET. When the SET is performed, the Command Responder (agent) must determine whether the value is indeed still unused; Two Network Management Applications may attempt to create a row (configuration entry) simultaneously and use the same value. If it is currently unused, the SET succeeds, and the Command Responder (agent) changes the value of this object according to an implementation-specific algorithm. If the value is in use, however, the SET fails. The Network Management Application must then re-read this variable to obtain a new usable value.
What is teNextTunnelIndex?
The next unused index a management station should use when creating a new row in the tunnel table; a value of 0 means the table is full and no more tunnels can be created.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.122.1.1.4 snmpwalk -v2c -c public <target> TE-MIB::teNextTunnelIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.122.1.1.4.1 snmpget -v2c -c public <target> TE-MIB::teNextTunnelIndex.1
Start monitoring MPLS-TE capable routers, vendor-neutral standards-based MIB (RFC 3970) (traffic-engineering tunnel/LSP status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TE-MIB::teNextTunnelIndex OID value, configure state conditions and alerts, and monitor any MPLS-TE capable routers, vendor-neutral standards-based MIB (RFC 3970) (traffic-engineering tunnel/LSP status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.122 | teMIB | TE-MIB |
| 1.3.6.1.2.1.122.1 | teMIBObjects | TE-MIB |
| 1.3.6.1.2.1.122.1.1 | teInfo | TE-MIB |
| 1.3.6.1.2.1.122.1.1.4 | teNextTunnelIndex | TE-MIB |