All MIBs › TCPIPX-MIB › tcpIpxConnState
tcpIpxConnState
Module: TCPIPX-MIB
OID (symbolic): TCPIPX-MIB::tcpIpxConnState
OID (numeric): 1.3.6.1.4.1.23.2.29.1.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The state of this TCP connection.
The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value.
If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection.
As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST
segments are not sent reliably).
What is tcpIpxConnState?
This object reports the TCP connection state, such as closed, listen, established, or timeWait, for a TCP session running over IPX. The only value a management station may write is deleteTCB(12), which immediately terminates the connection by deleting its TCB, and the agent may optionally send a RST segment (unreliable) to the remote endpoint. An admin would set tcpIpxConnState to deleteTCB(12) to forcibly kill a hung or stuck TCP-over-IPX connection directly from the management station.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.23.2.29.1.1.1.1 snmpwalk -v2c -c public <target> TCPIPX-MIB::tcpIpxConnState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.23.2.29.1.1.1.1.1 snmpget -v2c -c public <target> TCPIPX-MIB::tcpIpxConnState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.23.2.29.1.1.1.1.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> tcpIpxConnState.1
Start monitoring Legacy gateway equipment, TCP/IP over IPX tunneling (TCP/UDP-over-IPX session status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TCPIPX-MIB::tcpIpxConnState OID value, configure state conditions and alerts, and monitor any Legacy gateway equipment, TCP/IP over IPX tunneling (TCP/UDP-over-IPX session status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.23 | excelan | CMU-MIB |
| 1.3.6.1.4.1.23.2 | genericGroup | FASTPATH-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.23.2.29 | tcpx | TCPIPX-MIB |
| 1.3.6.1.4.1.23.2.29.1 | tcpxTcp | TCPIPX-MIB |
| 1.3.6.1.4.1.23.2.29.1.1 | tcpIpxConnTable | TCPIPX-MIB |
| 1.3.6.1.4.1.23.2.29.1.1.1 | tcpIpxConnEntry | TCPIPX-MIB |
| 1.3.6.1.4.1.23.2.29.1.1.1.1 | tcpIpxConnState | TCPIPX-MIB |