SYSTEM-RESOURCE-MIB :: peakSwitchClear

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SYSTEM-RESOURCE-MIB › peakSwitchClear

peakSwitchClear

Module: SYSTEM-RESOURCE-MIB

OID (symbolic): SYSTEM-RESOURCE-MIB::peakSwitchClear

OID (numeric): 1.3.6.1.4.1.52.4.1.1.12.2.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object is used to clear the values found in peakSwitchload and peakSwitchLoadTime.

When set with a value of clear(1) the values will be cleared. When read, a value of noClear(2) will be returned. A set of noClear(2) will have no effect.

What is peakSwitchClear?

This read-write enumerated object clears the recorded peak switch load and its timestamp when set to clear(1); reading it always returns noClear(2), and setting it to noClear(2) has no effect. Admins use this to reset the peak-load baseline after investigating a spike, so future peaks are measured freshly. For example, after confirming a recorded peak was caused by an expected one-time event, the admin would set this to clear(1) to reset peakSwitchload and peakSwitchLoadTime before continuing normal monitoring.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.12.2.5
snmpwalk -v2c -c public <target> SYSTEM-RESOURCE-MIB::peakSwitchClear

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.12.2.5.1
snmpget -v2c -c public <target> SYSTEM-RESOURCE-MIB::peakSwitchClear.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.12.2.5.1 i <value>

Start monitoring Cabletron Systems managed network switch (CPU load/peak-load monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYSTEM-RESOURCE-MIB::peakSwitchClear OID value, configure state conditions and alerts, and monitor any Cabletron Systems managed network switch (CPU load/peak-load monitoring) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCT-PRIORITY-QUEUING
1.3.6.1.4.1.52.4.1ctronCTRON-ISDN-CONFIGURATION-MIB
1.3.6.1.4.1.52.4.1.1ctPhysicalCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.1.12ctResourceCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.1.12.2sysResourceSwitchSYSTEM-RESOURCE-MIB
1.3.6.1.4.1.52.4.1.1.12.2.5peakSwitchClearSYSTEM-RESOURCE-MIB