All MIBs › SYNOPTICS-COMMON-MIB › s3CommonBoardPartStatus
s3CommonBoardPartStatus
Module: SYNOPTICS-COMMON-MIB
OID (symbolic): SYNOPTICS-COMMON-MIB::s3CommonBoardPartStatus
OID (numeric): 1.3.6.1.4.1.45.1.3.1.8.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Tells whether the board is partitioned or enabled. Writing with the value partition(2) will partition the board indefinitely and writing with the value enabled(1) will enable the board.
If a timed partition is desired, then this object must be written with timedPartition(3) and in the same PDU a partition duration must be supplied in s3CommonBoardPartTime. Timed partitions will not survive across a reset. In this case the port will go to the partition(2) state.
Boards cannot be partitioned in the 2810 concentrator and other workgroup concentrators. These agents will implement this object as read-only.
What is s3CommonBoardPartStatus?
Read-write enumerated control choosing whether a board is enabled(1), partitioned indefinitely (2), or partitioned for a timed duration (3, requiring s3CommonBoardPartTime to be set in the same request); an admin uses partition to take a misbehaving board offline from network management without physically removing it. Not writable on the 2810 concentrator and similar workgroup units.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.3.1.8.1.6 snmpwalk -v2c -c public <target> SYNOPTICS-COMMON-MIB::s3CommonBoardPartStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.3.1.8.1.6.1 snmpget -v2c -c public <target> SYNOPTICS-COMMON-MIB::s3CommonBoardPartStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.3.1.8.1.6.1 i <value>
Start monitoring SynOptics (legacy, later Bay Networks/Nortel) network hub/chassis (power/fan/module hardware status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYNOPTICS-COMMON-MIB::s3CommonBoardPartStatus OID value, configure state conditions and alerts, and monitor any SynOptics (legacy, later Bay Networks/Nortel) network hub/chassis (power/fan/module hardware status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3 | series3000 | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.1 | s3000Chassis | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.1.8 | s3CommonBoardTable | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.3.1.8.1 | s3CommonBoardEntry | SYNOPTICS-BASIC-ETHTOK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.3.1.8.1.6 | s3CommonBoardPartStatus | SYNOPTICS-COMMON-MIB |