All MIBs › SYNOPTICS-COMMON-MIB › s3AgentConfigLoadMode
s3AgentConfigLoadMode
Module: SYNOPTICS-COMMON-MIB
OID (symbolic): SYNOPTICS-COMMON-MIB::s3AgentConfigLoadMode
OID (numeric): 1.3.6.1.4.1.45.1.2.1.17
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This indicates whether the agent should get configuration data from the network, use the local configuration data, or try the network first and then fall back to local configuration if the network load fails. This object applies only to agents with boot prom support for agent configuration load options.
This parameter will not take effect until written into EEPROM (s3AgentWriteEeprom) and a reset (s3AgentReset) is issued.
What is s3AgentConfigLoadMode?
Read-write enumerated setting choosing how the agent obtains its configuration at boot: remoteConfig(2) from the network, localConfig(3) from stored local data, or localAsBackup(4) to try the network first and fall back locally on failure. Only applies to agents with boot-prom config-load support, and takes effect only after writing to EEPROM and a reset.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.2.1.17 snmpwalk -v2c -c public <target> SYNOPTICS-COMMON-MIB::s3AgentConfigLoadMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.2.1.17.1 snmpget -v2c -c public <target> SYNOPTICS-COMMON-MIB::s3AgentConfigLoadMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.2.1.17.1 i <value>
Start monitoring SynOptics (legacy, later Bay Networks/Nortel) network hub/chassis (power/fan/module hardware status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYNOPTICS-COMMON-MIB::s3AgentConfigLoadMode OID value, configure state conditions and alerts, and monitor any SynOptics (legacy, later Bay Networks/Nortel) network hub/chassis (power/fan/module hardware status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.2 | s3SnmpAgent | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.2.1 | s3AgentSw | SYNOPTICS-BASIC-ETHTOK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.2.1.17 | s3AgentConfigLoadMode | SYNOPTICS-COMMON-MIB |