All MIBs › SYNOPTICS-COMMON-MIB › s3AgentBootFile
s3AgentBootFile
Module: SYNOPTICS-COMMON-MIB
OID (symbolic): SYNOPTICS-COMMON-MIB::s3AgentBootFile
OID (numeric): 1.3.6.1.4.1.45.1.2.1.6
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: The name of the boot file that is sent to the file server during boot time. The actual boot protocol used to retrieve the file is determined by s3AgentBootProtocol.
This parameter will not take effect until written into EEPROM (s3AgentWriteEeprom) and a reset (s3AgentReset) is issued. This parameter is used only if the s3AgentBootMode is set to use EEPROM.
What is s3AgentBootFile?
Read-write string (0-64 chars) naming the boot file requested from the file server at boot time, fetched using whatever protocol s3AgentBootProtocol specifies; changes only take effect after being written to EEPROM (s3AgentWriteEeprom) and the agent is reset (s3AgentReset), and only applies when boot mode uses EEPROM.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.1.2.1.6 snmpwalk -v2c -c public <target> SYNOPTICS-COMMON-MIB::s3AgentBootFile
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.1.2.1.6.1 snmpget -v2c -c public <target> SYNOPTICS-COMMON-MIB::s3AgentBootFile.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.1.2.1.6.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> s3AgentBootFile.1
Start monitoring SynOptics (legacy, later Bay Networks/Nortel) network hub/chassis (power/fan/module hardware status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYNOPTICS-COMMON-MIB::s3AgentBootFile OID value, configure state conditions and alerts, and monitor any SynOptics (legacy, later Bay Networks/Nortel) network hub/chassis (power/fan/module hardware status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | CMU-MIB |
| 1.3.6.1.4.1.45.1 | products | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.2 | s3SnmpAgent | SYNOPTICS-BASIC-ETHTOK-MIB |
| 1.3.6.1.4.1.45.1.2.1 | s3AgentSw | SYNOPTICS-BASIC-ETHTOK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.1.2.1.6 | s3AgentBootFile | SYNOPTICS-COMMON-MIB |