All MIBs › SWL2MGMT-MIB › swL2FilterAddrState
swL2FilterAddrState
Module: SWL2MGMT-MIB
OID (symbolic): SWL2MGMT-MIB::swL2FilterAddrState
OID (numeric): 1.3.6.1.4.1.2272.1.201.1.2.6.1.3.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. dst-addr(2) - recieved frames's destination address are currently used to be filtered as it meets with the MAC address entry of the table. src-addr(3) - recieved frames's source address are currently used to be filtered as it meets with the MAC address entry of the table. dst-src-addr(4) - recieved frames's destination address or source address are currently used to be filtered as it meets with the MAC address entry of the table. invalid(5) - writing this value to the object, and then the corresponding entry will be removed from the table.
What is swL2FilterAddrState?
Read-write status and mode of a MAC filter entry: dst-addr(2) filters frames whose destination matches the MAC, src-addr(3) filters on source, dst-src-addr(4) on either, other(1) is a transitional state, and writing invalid(5) deletes the entry. Use it to block traffic to or from a specific device, such as a rogue host.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.201.1.2.6.1.3.1.2 snmpwalk -v2c -c public <target> SWL2MGMT-MIB::swL2FilterAddrState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.201.1.2.6.1.3.1.2.1 snmpget -v2c -c public <target> SWL2MGMT-MIB::swL2FilterAddrState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.201.1.2.6.1.3.1.2.1 i <value>
Start monitoring D-Link managed Layer 2 Ethernet switch (MAC learning/VLAN/spanning-tree status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SWL2MGMT-MIB::swL2FilterAddrState OID value, configure state conditions and alerts, and monitor any D-Link managed Layer 2 Ethernet switch (MAC learning/VLAN/spanning-tree status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.201 | cobra | SWPRIMGMT-MIB |
| 1.3.6.1.4.1.2272.1.201.1 | privateMgmt | SWPRIMGMT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2272.1.201.1.2 | swL2MgmtMIB | SWL2MGMT-MIB |
| 1.3.6.1.4.1.2272.1.201.1.2.6 | swL2FilterMgmt | SWL2MGMT-MIB |
| 1.3.6.1.4.1.2272.1.201.1.2.6.1 | swL2FilterAddrConfig | SWL2MGMT-MIB |
| 1.3.6.1.4.1.2272.1.201.1.2.6.1.3 | swL2FilterAddrCtrlTable | SWL2MGMT-MIB |
| 1.3.6.1.4.1.2272.1.201.1.2.6.1.3.1 | swL2FilterAddrCtrlEntry | SWL2MGMT-MIB |
| 1.3.6.1.4.1.2272.1.201.1.2.6.1.3.1.2 | swL2FilterAddrState | SWL2MGMT-MIB |