SWL2MGMT-MIB :: swL2ACLQosTemplateRuleL4SwitchActionRedirectDropUnreachable

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SWL2MGMT-MIB › swL2ACLQosTemplateRuleL4SwitchActionRedirectDropUnreachable

swL2ACLQosTemplateRuleL4SwitchActionRedirectDropUnreachable

Module: SWL2MGMT-MIB

OID (symbolic): SWL2MGMT-MIB::swL2ACLQosTemplateRuleL4SwitchActionRedirectDropUnreachable

OID (numeric): 1.3.6.1.4.1.2272.1.201.1.2.16.5.1.33

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object indicates the action of this entry.

other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. false(2) - routing unreachable packet by using L2/IPv4 router forwarding table. true(3) - dropping unreachable packet

What is swL2ACLQosTemplateRuleL4SwitchActionRedirectDropUnreachable?

Read-write choice of what to do with redirected packets whose target is unreachable. The enum values in the syntax are true(2)/false(3) but the description text says false(2) means route using the L2/IPv4 forwarding table and true(3) means drop, so the source is internally inconsistent; confirm on the device before relying on it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.201.1.2.16.5.1.33
snmpwalk -v2c -c public <target> SWL2MGMT-MIB::swL2ACLQosTemplateRuleL4SwitchActionRedirectDropUnreachable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.201.1.2.16.5.1.33.1
snmpget -v2c -c public <target> SWL2MGMT-MIB::swL2ACLQosTemplateRuleL4SwitchActionRedirectDropUnreachable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.201.1.2.16.5.1.33.1 i <value>

Start monitoring D-Link managed Layer 2 Ethernet switch (MAC learning/VLAN/spanning-tree status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SWL2MGMT-MIB::swL2ACLQosTemplateRuleL4SwitchActionRedirectDropUnreachable OID value, configure state conditions and alerts, and monitor any D-Link managed Layer 2 Ethernet switch (MAC learning/VLAN/spanning-tree status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2272rapidCityRAPID-CITY
1.3.6.1.4.1.2272.1rcMgmtRAPID-CITY
1.3.6.1.4.1.2272.1.201cobraSWPRIMGMT-MIB
1.3.6.1.4.1.2272.1.201.1privateMgmtSWPRIMGMT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2272.1.201.1.2swL2MgmtMIBSWL2MGMT-MIB
1.3.6.1.4.1.2272.1.201.1.2.16swL2ACLQosMgmtSWL2MGMT-MIB
1.3.6.1.4.1.2272.1.201.1.2.16.5swL2ACLQosTemplateRuleTableSWL2MGMT-MIB
1.3.6.1.4.1.2272.1.201.1.2.16.5.1swL2ACLQosTemplateRuleEntrySWL2MGMT-MIB
1.3.6.1.4.1.2272.1.201.1.2.16.5.1.33swL2ACLQosTemplateRuleL4SwitchActionRedirectDropUnreachableSWL2MGMT-MIB