All MIBs › SW-MIB › swFlashDLAdmStatus
swFlashDLAdmStatus
Module: SW-MIB
OID (symbolic): SW-MIB::swFlashDLAdmStatus
OID (numeric): 1.3.6.1.4.1.1588.2.1.1.1.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The desired state of the FLASH. A management station may place the FLASH in a desired state by setting this object accordingly: o swCurrent(1) indicates that the FLASH contains the current firmware image or config file; o swFwUpgrade(2) means that the firmware in the FLASH is to be upgraded from the host specified; o swCfUpload(3) means that the switch config file is to be uploaded to the host specified; or o swCfDownload(4) means that the switch config file is to be downloaded from the host specified. o swFwCorrupted(5) state indicates that the firmware in the FLASH is corrupted. This value is for informational purpose only. However, set of swFlashDLAdmStatus to this value is not allowed.
The host is specified in swFlashDLHost.0. In addition, user name is specified in swFlashDLUser.0, and the file name specified in swFlashDLFile.0.
Reference the user manual on the following commands, o firmwareDownload, o configUpload, and o configDownload.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1588.2.1.1.1.1.12 snmpwalk -v2c -c public <target> SW-MIB::swFlashDLAdmStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1588.2.1.1.1.1.12.1 snmpget -v2c -c public <target> SW-MIB::swFlashDLAdmStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1588.2.1.1.1.1.12.1 i <value>
Start monitoring Brocade Communications Fibre Channel switch/director, entire product line (port/trunk/zoning/fabric status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SW-MIB::swFlashDLAdmStatus OID value, configure state conditions and alerts, and monitor any Brocade Communications Fibre Channel switch/director, entire product line (port/trunk/zoning/fabric status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1588 | bcsi | Brocade-REG-MIB |
| 1.3.6.1.4.1.1588.2 | commDev | Brocade-REG-MIB |
| 1.3.6.1.4.1.1588.2.1 | fibrechannel | Brocade-REG-MIB |
| 1.3.6.1.4.1.1588.2.1.1 | fcSwitch | Brocade-REG-MIB |
| 1.3.6.1.4.1.1588.2.1.1.1.1 | swSystem | BROCADE-SYSTEM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1588.2.1.1.1 | sw | SW-MIB |
| 1.3.6.1.4.1.1588.2.1.1.1.1.12 | swFlashDLAdmStatus | SW-MIB |