All MIBs › SW-LAYER2-PORT-MANAGEMENT-MIB › swL2PortCtrlPriority
swL2PortCtrlPriority
Module: SW-LAYER2-PORT-MANAGEMENT-MIB
OID (symbolic): SW-LAYER2-PORT-MANAGEMENT-MIB::swL2PortCtrlPriority
OID (numeric): 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The priority queueing for packets received on this port, except for BPDU/IGMP packets and packets with unknown unicast destination address. IGMP and BPDU packets are always routed with high priority; packets with unknown unicast destination addresses are always routed with low priority. Other packets follow the rules below: other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values.
default(2) - A packet is normally classified as low priority, unless at least one of the following is true: (a)The packet contained a TAG (per 802.1Q definition) with the priority greater or equal to 4. (b)The address-table entry for the destination address had Pd=HIGH. force-low_priority(3) - A packet is normally classified as low priority. force-high_priority(4) - A packet is normally classified as high priority.
What is swL2PortCtrlPriority?
Sets this port's default packet-priority classification (low, high, or left at the switch's default rules) for traffic that isn't already flagged by an 802.1Q tag or address-table priority; BPDU and IGMP traffic is always high priority and unknown-unicast traffic always low regardless of this setting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.10 snmpwalk -v2c -c public <target> SW-LAYER2-PORT-MANAGEMENT-MIB::swL2PortCtrlPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.10.1 snmpget -v2c -c public <target> SW-LAYER2-PORT-MANAGEMENT-MIB::swL2PortCtrlPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.10.1 i <value>
Start monitoring D-Link/Marconi ES2000-series Layer 2 switch (per-port link/control/statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SW-LAYER2-PORT-MANAGEMENT-MIB::swL2PortCtrlPriority OID value, configure state conditions and alerts, and monitor any D-Link/Marconi ES2000-series Layer 2 switch (per-port link/control/statistics) from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.326 | fore | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2 | systems | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.20 | ethernet | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.20.1 | edge | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.20.1.2 | golf | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2 | golfcommon | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2 | fore_mgmt | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28 | es2000Mgmt | SW-COMMON-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2 | swL2Mgmt | SW-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4 | swL2PortMgmt | SW-LAYER2-PORT-MANAGEMENT-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2 | swL2PortCtrlTable | SW-LAYER2-PORT-MANAGEMENT-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1 | swL2PortCtrlEntry | SW-LAYER2-PORT-MANAGEMENT-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.10 | swL2PortCtrlPriority | SW-LAYER2-PORT-MANAGEMENT-MIB |