All MIBs › SUB10SYSTEMS-MIB › sub10UnitMgmtSnmpTraps
sub10UnitMgmtSnmpTraps
Module: SUB10SYSTEMS-MIB
OID (symbolic): SUB10SYSTEMS-MIB::sub10UnitMgmtSnmpTraps
OID (numeric): 1.3.6.1.4.1.39003.3.2.7.2
Node type: OBJECT-TYPE
Type: Sub10State
Access: read-write
Description: If set to 'enabled' the agent will forward traps to all configured trap destinations. If disabled traps are discarded. Traps are not sent if sub10UnitMgmtSnmpAgent is 'disabled(2)' regardless of the setting of this object.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.39003.3.2.7.2 snmpwalk -v2c -c public <target> SUB10SYSTEMS-MIB::sub10UnitMgmtSnmpTraps
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.39003.3.2.7.2.1 snmpget -v2c -c public <target> SUB10SYSTEMS-MIB::sub10UnitMgmtSnmpTraps.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.39003.3.2.7.2.1 s <value>
Start monitoring Sub10 Systems point-to-point microwave radio link terminal (firmware/identity status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SUB10SYSTEMS-MIB::sub10UnitMgmtSnmpTraps OID value, configure state conditions and alerts, and monitor any Sub10 Systems point-to-point microwave radio link terminal (firmware/identity status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.39003 | sub10Systems | SUB10SYSTEMS-MIB |
| 1.3.6.1.4.1.39003.3 | sub10Unit | SUB10SYSTEMS-MIB |
| 1.3.6.1.4.1.39003.3.2 | sub10UnitMgmt | SUB10SYSTEMS-MIB |
| 1.3.6.1.4.1.39003.3.2.7 | sub10UnitMgmtSnmp | SUB10SYSTEMS-MIB |
| 1.3.6.1.4.1.39003.3.2.7.2 | sub10UnitMgmtSnmpTraps | SUB10SYSTEMS-MIB |