SUB10SYSTEMS-MIB :: sub10UnitMgmtAlarmToSNMP

MIB Reference — IPNetwork Monitor · Updated September 12, 2026

All MIBsSUB10SYSTEMS-MIBsub10UnitMgmtAlarmToSNMP

sub10UnitMgmtAlarmToSNMP

Module: SUB10SYSTEMS-MIB

OID (symbolic): SUB10SYSTEMS-MIB::sub10UnitMgmtAlarmToSNMP

OID (numeric): 1.3.6.1.4.1.39003.3.2.6.1.1.18

Node type: OBJECT-TYPE

Type: Sub10State

Access: read-write

Description: If set to 'enabled' the alarm is forwarded as an SNMP notification / trap.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.39003.3.2.6.1.1.18
snmpwalk -v2c -c public <target> SUB10SYSTEMS-MIB::sub10UnitMgmtAlarmToSNMP

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.39003.3.2.6.1.1.18.1
snmpget -v2c -c public <target> SUB10SYSTEMS-MIB::sub10UnitMgmtAlarmToSNMP.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.39003.3.2.6.1.1.18.1 s <value>

Start monitoring Sub10 Systems point-to-point microwave radio link terminal (firmware/identity status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SUB10SYSTEMS-MIB::sub10UnitMgmtAlarmToSNMP OID value, configure state conditions and alerts, and monitor any Sub10 Systems point-to-point microwave radio link terminal (firmware/identity status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.39003sub10SystemsSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.3sub10UnitSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.3.2sub10UnitMgmtSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.3.2.6sub10UnitMgmtAlarmsSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.3.2.6.1sub10UnitMgmtAlarmTableSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.3.2.6.1.1sub10UnitMgmtAlarmEntrySUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.3.2.6.1.1.18sub10UnitMgmtAlarmToSNMPSUB10SYSTEMS-MIB