SUB10SYSTEMS-MIB :: sub10UnitMgmtAlarmClearThresh

MIB Reference — IPNetwork Monitor · Updated September 12, 2026

All MIBsSUB10SYSTEMS-MIBsub10UnitMgmtAlarmClearThresh

sub10UnitMgmtAlarmClearThresh

Module: SUB10SYSTEMS-MIB

OID (symbolic): SUB10SYSTEMS-MIB::sub10UnitMgmtAlarmClearThresh

OID (numeric): 1.3.6.1.4.1.39003.3.2.6.1.1.10

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: The threshold value which the measured object's value crosses causes the alarm to be cleared. The behaviour of a measured value and alarm threshold comparison is defined by the object sub10UnitMgmtAlarmThreshType.

The sub10UnitMgmtAlarmClearThresh value may be different to the sub10UnitMgmtAlarmRaiseThresh allowing some hysteresis bewteen raising and clearing of alarms thus avoiding an alarm being continually raised and cleared if the measured value is changing frequently around the threshold. If different raise and clear thresholds are not required then the sub10UnitMgmtAlarmClearThresh and sub10UnitMgmtAlarmRaiseThresh should be set to the same value.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.39003.3.2.6.1.1.10
snmpwalk -v2c -c public <target> SUB10SYSTEMS-MIB::sub10UnitMgmtAlarmClearThresh

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.39003.3.2.6.1.1.10.1
snmpget -v2c -c public <target> SUB10SYSTEMS-MIB::sub10UnitMgmtAlarmClearThresh.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.39003.3.2.6.1.1.10.1 s <value>

Start monitoring Sub10 Systems point-to-point microwave radio link terminal (firmware/identity status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SUB10SYSTEMS-MIB::sub10UnitMgmtAlarmClearThresh OID value, configure state conditions and alerts, and monitor any Sub10 Systems point-to-point microwave radio link terminal (firmware/identity status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.39003sub10SystemsSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.3sub10UnitSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.3.2sub10UnitMgmtSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.3.2.6sub10UnitMgmtAlarmsSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.3.2.6.1sub10UnitMgmtAlarmTableSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.3.2.6.1.1sub10UnitMgmtAlarmEntrySUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.3.2.6.1.1.10sub10UnitMgmtAlarmClearThreshSUB10SYSTEMS-MIB