All MIBs › SUB10SYSTEMS-MIB › sub10UnitMgmtAlarmClearIntvls
sub10UnitMgmtAlarmClearIntvls
Module: SUB10SYSTEMS-MIB
OID (symbolic): SUB10SYSTEMS-MIB::sub10UnitMgmtAlarmClearIntvls
OID (numeric): 1.3.6.1.4.1.39003.3.2.6.1.1.12
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The number of continuous monitoring intervals (see sub10UnitMgmtAlarmMonitorIntvl) where the measured object has crossed the clear threshold before the alarm state is set to cleared. This is intended to reduce the number of alarm state transitions when the measured object value is rapidly changing close to the configured clear threshold.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.39003.3.2.6.1.1.12 snmpwalk -v2c -c public <target> SUB10SYSTEMS-MIB::sub10UnitMgmtAlarmClearIntvls
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.39003.3.2.6.1.1.12.1 snmpget -v2c -c public <target> SUB10SYSTEMS-MIB::sub10UnitMgmtAlarmClearIntvls.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.39003.3.2.6.1.1.12.1 i <value>
Start monitoring Sub10 Systems point-to-point microwave radio link terminal (firmware/identity status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SUB10SYSTEMS-MIB::sub10UnitMgmtAlarmClearIntvls OID value, configure state conditions and alerts, and monitor any Sub10 Systems point-to-point microwave radio link terminal (firmware/identity status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.39003 | sub10Systems | SUB10SYSTEMS-MIB |
| 1.3.6.1.4.1.39003.3 | sub10Unit | SUB10SYSTEMS-MIB |
| 1.3.6.1.4.1.39003.3.2 | sub10UnitMgmt | SUB10SYSTEMS-MIB |
| 1.3.6.1.4.1.39003.3.2.6 | sub10UnitMgmtAlarms | SUB10SYSTEMS-MIB |
| 1.3.6.1.4.1.39003.3.2.6.1 | sub10UnitMgmtAlarmTable | SUB10SYSTEMS-MIB |
| 1.3.6.1.4.1.39003.3.2.6.1.1 | sub10UnitMgmtAlarmEntry | SUB10SYSTEMS-MIB |
| 1.3.6.1.4.1.39003.3.2.6.1.1.12 | sub10UnitMgmtAlarmClearIntvls | SUB10SYSTEMS-MIB |