SUB10SYSTEMS-MIB :: sub10EthMgmtVlanDefaultId

MIB Reference — IPNetwork Monitor · Updated September 12, 2026

All MIBsSUB10SYSTEMS-MIBsub10EthMgmtVlanDefaultId

sub10EthMgmtVlanDefaultId

Module: SUB10SYSTEMS-MIB

OID (symbolic): SUB10SYSTEMS-MIB::sub10EthMgmtVlanDefaultId

OID (numeric): 1.3.6.1.4.1.39003.4.2.2.3

Node type: OBJECT-TYPE

Type: Sub10VlanId

Access: read-write

Description: The default vlan id which is tagged to all incoming untagged user traffic ingressing the ethernet interface. The default VLAN is also untagged from all user traffic egressing the ethernet interface.

The default VLAN must be present in the allowed VLAN table sub10EthMgmtVlanAllowedTable and is only valid when sub10EthMgmtVlanDefaultEnabled and sub10EthMgmtVlanFiltering are enabled.

IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.39003.4.2.2.3
snmpwalk -v2c -c public <target> SUB10SYSTEMS-MIB::sub10EthMgmtVlanDefaultId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.39003.4.2.2.3.1
snmpget -v2c -c public <target> SUB10SYSTEMS-MIB::sub10EthMgmtVlanDefaultId.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.39003.4.2.2.3.1 s <value>

Start monitoring Sub10 Systems point-to-point microwave radio link terminal (firmware/identity status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SUB10SYSTEMS-MIB::sub10EthMgmtVlanDefaultId OID value, configure state conditions and alerts, and monitor any Sub10 Systems point-to-point microwave radio link terminal (firmware/identity status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.39003sub10SystemsSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.4sub10EthernetSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.4.2sub10EthernetMgmtSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.4.2.2sub10EthMgmtVlanSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.4.2.2.3sub10EthMgmtVlanDefaultIdSUB10SYSTEMS-MIB