All MIBs › SUB10SYSTEMS-MIB › sub10EthMgmtVlanDefaultEnabled
sub10EthMgmtVlanDefaultEnabled
Module: SUB10SYSTEMS-MIB
OID (symbolic): SUB10SYSTEMS-MIB::sub10EthMgmtVlanDefaultEnabled
OID (numeric): 1.3.6.1.4.1.39003.4.2.2.2
Node type: OBJECT-TYPE
Type: Sub10State
Access: read-write
Description: Enable Default VLAN tagging and untagging on the ethernet interface. Only valid when sub10EthMgmtVlanFiltering is enabled.
Default VAN tagging allows manipulation of untagged traffic ingressing the interface by applying the specified Default VLAN Id, priority and DEI and manipulation of traffic egressing the ethernet interface that is tagged with the Default VLAN by stripping off the VLAN and transmitting as untagged traffic.
IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.39003.4.2.2.2 snmpwalk -v2c -c public <target> SUB10SYSTEMS-MIB::sub10EthMgmtVlanDefaultEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.39003.4.2.2.2.1 snmpget -v2c -c public <target> SUB10SYSTEMS-MIB::sub10EthMgmtVlanDefaultEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.39003.4.2.2.2.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> sub10EthMgmtVlanDefaultEnabled.1
Start monitoring Sub10 Systems point-to-point microwave radio link terminal (firmware/identity status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SUB10SYSTEMS-MIB::sub10EthMgmtVlanDefaultEnabled OID value, configure state conditions and alerts, and monitor any Sub10 Systems point-to-point microwave radio link terminal (firmware/identity status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.39003 | sub10Systems | SUB10SYSTEMS-MIB |
| 1.3.6.1.4.1.39003.4 | sub10Ethernet | SUB10SYSTEMS-MIB |
| 1.3.6.1.4.1.39003.4.2 | sub10EthernetMgmt | SUB10SYSTEMS-MIB |
| 1.3.6.1.4.1.39003.4.2.2 | sub10EthMgmtVlan | SUB10SYSTEMS-MIB |
| 1.3.6.1.4.1.39003.4.2.2.2 | sub10EthMgmtVlanDefaultEnabled | SUB10SYSTEMS-MIB |