SUB10SYSTEMS-MIB :: sub10EthMgmtVlanDefaultDEI

MIB Reference — IPNetwork Monitor · Updated September 12, 2026

All MIBsSUB10SYSTEMS-MIBsub10EthMgmtVlanDefaultDEI

sub10EthMgmtVlanDefaultDEI

Module: SUB10SYSTEMS-MIB

OID (symbolic): SUB10SYSTEMS-MIB::sub10EthMgmtVlanDefaultDEI

OID (numeric): 1.3.6.1.4.1.39003.4.2.2.5

Node type: OBJECT-TYPE

Type: Sub10State

Access: read-write

Description: The default vlan drop eligible indicator used when tagging the default VLAN to all incoming untagged user traffic ingressing the ethernet interface.

Only valid when sub10EthMgmtVlanDefaultEnabled and sub10EthMgmtVlanFiltering are enabled.

IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.39003.4.2.2.5
snmpwalk -v2c -c public <target> SUB10SYSTEMS-MIB::sub10EthMgmtVlanDefaultDEI

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.39003.4.2.2.5.1
snmpget -v2c -c public <target> SUB10SYSTEMS-MIB::sub10EthMgmtVlanDefaultDEI.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.39003.4.2.2.5.1 s <value>

Start monitoring Sub10 Systems point-to-point microwave radio link terminal (firmware/identity status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SUB10SYSTEMS-MIB::sub10EthMgmtVlanDefaultDEI OID value, configure state conditions and alerts, and monitor any Sub10 Systems point-to-point microwave radio link terminal (firmware/identity status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.39003sub10SystemsSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.4sub10EthernetSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.4.2sub10EthernetMgmtSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.4.2.2sub10EthMgmtVlanSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.4.2.2.5sub10EthMgmtVlanDefaultDEISUB10SYSTEMS-MIB