SUB10SYSTEMS-MIB :: sub10EthMgmtQoSUntaggedQueue

MIB Reference — IPNetwork Monitor · Updated September 12, 2026

All MIBsSUB10SYSTEMS-MIBsub10EthMgmtQoSUntaggedQueue

sub10EthMgmtQoSUntaggedQueue

Module: SUB10SYSTEMS-MIB

OID (symbolic): SUB10SYSTEMS-MIB::sub10EthMgmtQoSUntaggedQueue

OID (numeric): 1.3.6.1.4.1.39003.4.2.3.3

Node type: OBJECT-TYPE

Type: Sub10QoSQueue

Access: read-write

Description: This defines the QoS queue where all untagged ethernet frames are placed.

Only valid when sub10EthMgmtQoSQType = 'qosEthernet'

For tagged frames see sub10EthMgmtQoSVlanMappingTable and sub10EthMgmtQoSPCPMappingTable.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.39003.4.2.3.3
snmpwalk -v2c -c public <target> SUB10SYSTEMS-MIB::sub10EthMgmtQoSUntaggedQueue

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.39003.4.2.3.3.1
snmpget -v2c -c public <target> SUB10SYSTEMS-MIB::sub10EthMgmtQoSUntaggedQueue.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.39003.4.2.3.3.1 s <value>

Start monitoring Sub10 Systems point-to-point microwave radio link terminal (firmware/identity status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SUB10SYSTEMS-MIB::sub10EthMgmtQoSUntaggedQueue OID value, configure state conditions and alerts, and monitor any Sub10 Systems point-to-point microwave radio link terminal (firmware/identity status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.39003sub10SystemsSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.4sub10EthernetSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.4.2sub10EthernetMgmtSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.4.2.3sub10EthMgmtQoSSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.4.2.3.3sub10EthMgmtQoSUntaggedQueueSUB10SYSTEMS-MIB