SUB10SYSTEMS-MIB :: sub10EthMgmtPhySpeed

MIB Reference — IPNetwork Monitor · Updated September 12, 2026

All MIBs › SUB10SYSTEMS-MIB › sub10EthMgmtPhySpeed

sub10EthMgmtPhySpeed

Module: SUB10SYSTEMS-MIB

OID (symbolic): SUB10SYSTEMS-MIB::sub10EthMgmtPhySpeed

OID (numeric): 1.3.6.1.4.1.39003.4.2.1.1.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: Speed of the ethernet interface in bits per second used only when sub10UnitMgmtPhyAutoNeg=disabled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.39003.4.2.1.1.1.2
snmpwalk -v2c -c public <target> SUB10SYSTEMS-MIB::sub10EthMgmtPhySpeed

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.39003.4.2.1.1.1.2.1
snmpget -v2c -c public <target> SUB10SYSTEMS-MIB::sub10EthMgmtPhySpeed.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.39003.4.2.1.1.1.2.1 i <value>

Start monitoring Sub10 Systems point-to-point microwave radio link terminal (firmware/identity status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SUB10SYSTEMS-MIB::sub10EthMgmtPhySpeed OID value, configure state conditions and alerts, and monitor any Sub10 Systems point-to-point microwave radio link terminal (firmware/identity status) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.39003sub10SystemsSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.4sub10EthernetSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.4.2sub10EthernetMgmtSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.4.2.1sub10EthMgmtPhySUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.4.2.1.1sub10EthMgmtPhyTableSUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.4.2.1.1.1sub10EthMgmtPhyEntrySUB10SYSTEMS-MIB
1.3.6.1.4.1.39003.4.2.1.1.1.2sub10EthMgmtPhySpeedSUB10SYSTEMS-MIB

Module

This MIB depends on