STN-IPROUTING-MIB :: stnRipExtUpdateTime

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsSTN-IPROUTING-MIBstnRipExtUpdateTime

stnRipExtUpdateTime

Module: STN-IPROUTING-MIB

OID (symbolic): STN-IPROUTING-MIB::stnRipExtUpdateTime

OID (numeric): 1.3.6.1.4.1.3551.2.12.3.2

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The time between transmission of RIP updates.

What is stnRipExtUpdateTime?

This is the configured time interval between transmissions of RIP routing updates. Admins tune this to balance faster route convergence against the additional RIP broadcast/multicast traffic generated on the network.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3551.2.12.3.2
snmpwalk -v2c -c public <target> STN-IPROUTING-MIB::stnRipExtUpdateTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3551.2.12.3.2.1
snmpget -v2c -c public <target> STN-IPROUTING-MIB::stnRipExtUpdateTime.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.3551.2.12.3.2.1 i <value>

Start monitoring Spring Tide Networks (Lucent) multiservice edge router (route-cache/circuit status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the STN-IPROUTING-MIB::stnRipExtUpdateTime OID value, configure state conditions and alerts, and monitor any Spring Tide Networks (Lucent) multiservice edge router (route-cache/circuit status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3551springtidenetSPRING-TIDE-NETWORKS-SMI
1.3.6.1.4.1.3551.2stnSystemsSPRING-TIDE-NETWORKS-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3551.2.12stnIpRoutingSTN-IPROUTING-MIB
1.3.6.1.4.1.3551.2.12.3stnRipSTN-IPROUTING-MIB
1.3.6.1.4.1.3551.2.12.3.2stnRipExtUpdateTimeSTN-IPROUTING-MIB