All MIBs › STATISTICS-MIB › hpLdbalStatsPortState
hpLdbalStatsPortState
Module: STATISTICS-MIB
OID (symbolic): STATISTICS-MIB::hpLdbalStatsPortState
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.9.11.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This variable describes the load balancing port state. A disabled state indicates the port does not have a link beat. An initial state indicates the port has recently established a link beat and is detecting whether or not it is in the load balancing domain. An established state indicates that the port is inside the load balancing domain, directly connected to another load balancing port, and learning addresses via the reception of MAC address learn information packets. A notEstablished state indicates that the port is outside the load balancing domain, not directly connected to a load balancing port, and learning MAC address by receiving unknown source address packets. An error state indicates the port has detected a direct connection to more than one load balancing port and is blocked, only accepting load balancing protocol packets. When the error condition clears, the port transitions either into the established or not established state.
What is hpLdbalStatsPortState?
The load-balancing negotiation state of the port - e.g. established (actively load-balancing with a directly connected peer), notEstablished, initial, or error (multiple peers detected, port blocked) - the first thing to check when a load-balanced trunk isn't passing traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.9.11.1.1.2 snmpwalk -v2c -c public <target> STATISTICS-MIB::hpLdbalStatsPortState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.9.11.1.1.2.1 snmpget -v2c -c public <target> STATISTICS-MIB::hpLdbalStatsPortState.1
Start monitoring HP ProCurve/Aruba managed switch (per-VLAN IPX/interface statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the STATISTICS-MIB::hpLdbalStatsPortState OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba managed switch (per-VLAN IPX/interface statistics) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.9 | hpSwitchStatistics | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.9.11 | hpLdbalStats | STATISTICS-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.9.11.1 | hpLdbalStatsPortTable | STATISTICS-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.9.11.1.1 | hpLdbalStatsPortEntry | STATISTICS-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.9.11.1.1.2 | hpLdbalStatsPortState | STATISTICS-MIB |