SSPM-MIB :: sspmSourceProfileLooseSrcRteFill

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsSSPM-MIBsspmSourceProfileLooseSrcRteFill

sspmSourceProfileLooseSrcRteFill

Module: SSPM-MIB

OID (symbolic): SSPM-MIB::sspmSourceProfileLooseSrcRteFill

OID (numeric): 1.3.6.1.2.1.16.28.1.2.1.1.8

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-create

Description: In the event that the test should run over a specific route, the intent is to force the route using the Loose Source Route option in IPv4 [RFC791] and IPv6 [RFC2460]. This object contains a series of IP addresses along the path that would be put into the loose source route option in the IP header.

The IPv4 addresses are to be listed as 32-bit address values, and the IPv6 addresses are to be listed as a string of 128-bit addresses. The maximum length allowed within the IPv4 source route option is 63 addresses. To simply account for IPv6 addresses as well, the maximum length of the octet string is 240. This allows up to 60 IPv4 addresses or up to 15 IPv6 addresses in the string.

What is sspmSourceProfileLooseSrcRteFill?

Holds a list of IP addresses (up to 60 IPv4 or 15 IPv6, packed into up to 240 bytes) to force test traffic through a specific path using the IPv4/IPv6 Loose Source Route option, which an admin uses when a measurement needs to follow a particular route rather than whatever the network would normally choose.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.16rmonLBHUB-BOOM-MIB
Numeric OIDNameModule
1.3.6.1.2.1.16.28sspmMIBSSPM-MIB
1.3.6.1.2.1.16.28.1sspmMIBObjectsSSPM-MIB
1.3.6.1.2.1.16.28.1.2sspmSourceSSPM-MIB
1.3.6.1.2.1.16.28.1.2.1sspmSourceProfileTableSSPM-MIB
1.3.6.1.2.1.16.28.1.2.1.1sspmSourceProfileEntrySSPM-MIB
1.3.6.1.2.1.16.28.1.2.1.1.8sspmSourceProfileLooseSrcRteFillSSPM-MIB