SS7I-MIB :: ss7iCfgIpAddr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsSS7I-MIBss7iCfgIpAddr

ss7iCfgIpAddr

Module: SS7I-MIB

OID (symbolic): SS7I-MIB::ss7iCfgIpAddr

OID (numeric): 1.3.6.1.4.1.429.1.35.1.1.1.2

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: The IP address on interface 0 of the HiPer SS7i.

What is ss7iCfgIpAddr?

This is the IP address configured on interface 0 of the HiPer SS7i card. An admin sets this to give the card its own management/signaling IP address on the chassis's network.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.1.35.1.1.1.2
snmpwalk -v2c -c public <target> SS7I-MIB::ss7iCfgIpAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.429.1.35.1.1.1.2.1
snmpget -v2c -c public <target> SS7I-MIB::ss7iCfgIpAddr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.429.1.35.1.1.1.2.1 a <value>

Start monitoring US Robotics (usr) HiPer SS7i signaling gateway card in a Total Control-style chassis (SS7-over-IP interface configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SS7I-MIB::ss7iCfgIpAddr OID value, configure state conditions and alerts, and monitor any US Robotics (usr) HiPer SS7i signaling gateway card in a Total Control-style chassis (SS7-over-IP interface configuration) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.429usrCHS-MIB
1.3.6.1.4.1.429.1nasCHS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.429.1.35ss7iSS7I-MIB
1.3.6.1.4.1.429.1.35.1ss7iCfgSS7I-MIB
1.3.6.1.4.1.429.1.35.1.1ss7iCfgTableSS7I-MIB
1.3.6.1.4.1.429.1.35.1.1.1ss7iCfgEntrySS7I-MIB
1.3.6.1.4.1.429.1.35.1.1.1.2ss7iCfgIpAddrSS7I-MIB