All MIBs › SS-OPT-MIB › cdx6500SSDeactivationMode
cdx6500SSDeactivationMode
Module: SS-OPT-MIB
OID (symbolic): SS-OPT-MIB::cdx6500SSDeactivationMode
OID (numeric): 1.3.6.1.4.1.449.2.1.2.2.14.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This specifies how the switched service/backup port is deactivated after the original link is up. none - Backup port can only be deactivated by operator intervention. busyOut - The backup port is deactivated after all the calls on that port are cleared for a predetermined amount of time. This substitutes the value assigned to the parameter Link Hold Time with the value assigned to the parameter Idle Disconnect Time in the X.25 Port Record. The Idle Disconnect Time will then work as described in the Operators Guide. When Deactivation Mode = BUSY OUT and Link Hold Time = 0 (zero) the overall effect is the same as setting this entry to NONE. imm - The backup link is terminated IMMediately when the monitored port is restored regardless of how many calls are present. newvalNone - same functionality as 'none', new enumeration added for RFC1155 compatibility.
What is cdx6500SSDeactivationMode?
Selects how this backup port is taken back down once the original link is restored: none (only by operator intervention), busyOut (after existing calls clear and an idle-disconnect timer expires), or imm (immediately, dropping any active calls).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.2.14.1.7 snmpwalk -v2c -c public <target> SS-OPT-MIB::cdx6500SSDeactivationMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.2.14.1.7.1 snmpget -v2c -c public <target> SS-OPT-MIB::cdx6500SSDeactivationMode.1
Start monitoring insufficient information to identify a specific device or vendor (optional SS-protocol feature configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SS-OPT-MIB::cdx6500SSDeactivationMode OID value, configure state conditions and alerts, and monitor any insufficient information to identify a specific device or vendor (optional SS-protocol feature configuration) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2 | cdx6500Configuration | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.2 | cdx6500CfgGeneralGroup | BCST-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.2.2.14 | cdx6500GCTLSSTable | SS-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.2.14.1 | cdx6500SSCfgEntry | SS-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.2.14.1.7 | cdx6500SSDeactivationMode | SS-OPT-MIB |