SPC200 :: portStatsNoise

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SPC200 › portStatsNoise

portStatsNoise

Module: SPC200

OID (symbolic): SPC200::portStatsNoise

OID (numeric): 1.3.6.1.4.1.22764.1.1.1.2.1.5

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: The DB value of the noise associated with the carrier wave entry.

What is portStatsNoise?

A Counter32 giving the dB noise level measured on the same indexed carrier wave (band/group/carrier) as its sibling portStatsSignal. Comparing the two lets an operator spot carriers with poor signal-to-noise ratio that may need to be notched out or have their modulation reduced.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22764.1.1.1.2.1.5
snmpwalk -v2c -c public <target> SPC200::portStatsNoise

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.22764.1.1.1.2.1.5.1
snmpget -v2c -c public <target> SPC200::portStatsNoise.1

Start monitoring powerline communication (PLC) network adapter/bridge (master/slave BSS role, sync-band/Ethernet interface status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SPC200::portStatsNoise OID value, configure state conditions and alerts, and monitor any powerline communication (PLC) network adapter/bridge (master/slave BSS role, sync-band/Ethernet interface status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.22764spidcomSPIDCOM-MIB
Numeric OIDNameModule
1.3.6.1.4.1.22764.1spc200MIBSPC200
1.3.6.1.4.1.22764.1.1plcSPC200
1.3.6.1.4.1.22764.1.1.1statsSPC200
1.3.6.1.4.1.22764.1.1.1.2portStatsTableSPC200
1.3.6.1.4.1.22764.1.1.1.2.1portStatsEntrySPC200
1.3.6.1.4.1.22764.1.1.1.2.1.5portStatsNoiseSPC200