All MIBs › SPC200 › plcSlaveBssId
plcSlaveBssId
Module: SPC200
OID (symbolic): SPC200::plcSlaveBssId
OID (numeric): 1.3.6.1.4.1.22764.1.1.2.6.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value of the slave Bss Id
What is plcSlaveBssId?
A read-write INTEGER (0-99) setting the BSS identifier this node uses when acting as slave, the counterpart to plcMasterBssId used to match a slave node to its intended master's network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22764.1.1.2.6.2 snmpwalk -v2c -c public <target> SPC200::plcSlaveBssId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22764.1.1.2.6.2.1 snmpget -v2c -c public <target> SPC200::plcSlaveBssId.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22764.1.1.2.6.2.1 i <value>
Start monitoring powerline communication (PLC) network adapter/bridge (master/slave BSS role, sync-band/Ethernet interface status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SPC200::plcSlaveBssId OID value, configure state conditions and alerts, and monitor any powerline communication (PLC) network adapter/bridge (master/slave BSS role, sync-band/Ethernet interface status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22764 | spidcom | SPIDCOM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22764.1 | spc200MIB | SPC200 |
| 1.3.6.1.4.1.22764.1.1 | plc | SPC200 |
| 1.3.6.1.4.1.22764.1.1.2 | plcObjects | SPC200 |
| 1.3.6.1.4.1.22764.1.1.2.6 | plcBssId | SPC200 |
| 1.3.6.1.4.1.22764.1.1.2.6.2 | plcSlaveBssId | SPC200 |