SPC200 :: plcSNAnalyserEnable

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SPC200 › plcSNAnalyserEnable

plcSNAnalyserEnable

Module: SPC200

OID (symbolic): SPC200::plcSNAnalyserEnable

OID (numeric): 1.3.6.1.4.1.22764.1.1.2.4.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: true if the modem should turn to spectrum analyser mode. In this mode the modem enters a receive only mode, and captures periodic samples of the signal on the powerline. The spectrum analyser mode shall be disabled for normal powerline modem operation.

What is plcSNAnalyserEnable?

A read-write flag that puts the modem into spectrum-analyser (receive-only) mode, where it periodically samples the powerline signal instead of operating normally. An installer enables this temporarily to survey line conditions (e.g. before deployment) and must disable it again for normal PLC modem operation, since the device won't pass traffic while it's on.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22764.1.1.2.4.1
snmpwalk -v2c -c public <target> SPC200::plcSNAnalyserEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.22764.1.1.2.4.1.1
snmpget -v2c -c public <target> SPC200::plcSNAnalyserEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.22764.1.1.2.4.1.1 i <value>

Start monitoring powerline communication (PLC) network adapter/bridge (master/slave BSS role, sync-band/Ethernet interface status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SPC200::plcSNAnalyserEnable OID value, configure state conditions and alerts, and monitor any powerline communication (PLC) network adapter/bridge (master/slave BSS role, sync-band/Ethernet interface status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.22764spidcomSPIDCOM-MIB
Numeric OIDNameModule
1.3.6.1.4.1.22764.1spc200MIBSPC200
1.3.6.1.4.1.22764.1.1plcSPC200
1.3.6.1.4.1.22764.1.1.2plcObjectsSPC200
1.3.6.1.4.1.22764.1.1.2.4plcSNAnalyserSPC200
1.3.6.1.4.1.22764.1.1.2.4.1plcSNAnalyserEnableSPC200