SONOMASYSTEMS-SONOMA-ETHERNET-MIB :: enetSMCLastLinkResetReason

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SONOMASYSTEMS-SONOMA-ETHERNET-MIB › enetSMCLastLinkResetReason

enetSMCLastLinkResetReason

Module: SONOMASYSTEMS-SONOMA-ETHERNET-MIB

OID (symbolic): SONOMASYSTEMS-SONOMA-ETHERNET-MIB::enetSMCLastLinkResetReason

OID (numeric): 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.19

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object gives the reason code for the last reset which occurred on this LAN physical link. A value of noReason(1) is returned if the link has not reset. A value of management(2) is returned when a link reset has been caused by a management protocol (either SNMP or by LMS). A value of deviceReset(3) is returned if the link reset was caused by a hardware failure. A value of cableDrop(4) is returned when the link reset was caused by a missing or faulty cable.

What is enetSMCLastLinkResetReason?

Reports the cause of the most recent link reset on this port: noReason (link hasn't reset), management (triggered via SNMP or LMS), deviceReset (caused by a hardware failure), or cableDrop (missing or faulty cable). Check this after an unexpected reset to distinguish an administrative action from an actual hardware or cabling fault.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.19
snmpwalk -v2c -c public <target> SONOMASYSTEMS-SONOMA-ETHERNET-MIB::enetSMCLastLinkResetReason

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.19.1
snmpget -v2c -c public <target> SONOMASYSTEMS-SONOMA-ETHERNET-MIB::enetSMCLastLinkResetReason.1

Start monitoring Sonoma Systems network equipment (Ethernet port link/traffic status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SONOMASYSTEMS-SONOMA-ETHERNET-MIB::enetSMCLastLinkResetReason OID value, configure state conditions and alerts, and monitor any Sonoma Systems network equipment (Ethernet port link/traffic status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2926sonomaSystemsSONOMASYSTEMS-SONOMA-MIB
1.3.6.1.4.1.2926.25sonomaSeriesSONOMASYSTEMS-SONOMA-MIB
1.3.6.1.4.1.2926.25.5sonomaLANSONOMASYSTEMS-SONOMA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2926.25.5.1sonomaEthernetSONOMASYSTEMS-SONOMA-ETHERNET-MIB
1.3.6.1.4.1.2926.25.5.1.1ethernetAdapterGroupSONOMASYSTEMS-SONOMA-ETHERNET-MIB
1.3.6.1.4.1.2926.25.5.1.1.1enetSMCGroupSONOMASYSTEMS-SONOMA-ETHERNET-MIB
1.3.6.1.4.1.2926.25.5.1.1.1.2enetSMCStatsTableSONOMASYSTEMS-SONOMA-ETHERNET-MIB
1.3.6.1.4.1.2926.25.5.1.1.1.2.1enetSMCStatsEntrySONOMASYSTEMS-SONOMA-ETHERNET-MIB
1.3.6.1.4.1.2926.25.5.1.1.1.2.1.19enetSMCLastLinkResetReasonSONOMASYSTEMS-SONOMA-ETHERNET-MIB