All MIBs › SNR-ERD-3s › userSense2Name
userSense2Name
Module: SNR-ERD-3s
OID (symbolic): SNR-ERD-3s::userSense2Name
OID (numeric): 1.3.6.1.4.1.40418.2.4.5.6
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: qwerty
What is userSense2Name?
A short label (up to 10 characters) an admin assigns to general-purpose user sensor input 2, the counterpart to userSense1Name for the unit's second user-defined sensor.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.4.5.6 snmpwalk -v2c -c public <target> SNR-ERD-3s::userSense2Name
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.4.5.6.1 snmpget -v2c -c public <target> SNR-ERD-3s::userSense2Name.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.40418.2.4.5.6.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> userSense2Name.1
Start monitoring NAG SNR-ERD-3s environmental relay/alarm device (sensor/relay contact and alarm-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-3s::userSense2Name OID value, configure state conditions and alerts, and monitor any NAG SNR-ERD-3s environmental relay/alarm device (sensor/relay contact and alarm-count status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.40418 | snr | SNR-ERD-2 |
| 1.3.6.1.4.1.40418.2 | snr_erd | SNR-ERD-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40418.2.4 | snr_erd_3s | SNR-ERD-3s |
| 1.3.6.1.4.1.40418.2.4.5 | commS | SNR-ERD-3s |
| 1.3.6.1.4.1.40418.2.4.5.6 | userSense2Name | SNR-ERD-3s |