SNR-ERD-3s :: monitorAnySensorSignal2contact6

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SNR-ERD-3s › monitorAnySensorSignal2contact6

monitorAnySensorSignal2contact6

Module: SNR-ERD-3s

OID (symbolic): SNR-ERD-3s::monitorAnySensorSignal2contact6

OID (numeric): 1.3.6.1.4.1.40418.2.4.3.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: qwerty

What is monitorAnySensorSignal2contact6?

Reports/sets the state of the generic dry-contact sensor wired to contact 6, using the same sensorOff(0)/sensorOn(3)/sensorIs0(1)/sensorIs1(2) values as monitorAnySensorSignal1contact5 for its own separate contact.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.4.3.5
snmpwalk -v2c -c public <target> SNR-ERD-3s::monitorAnySensorSignal2contact6

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.4.3.5.1
snmpget -v2c -c public <target> SNR-ERD-3s::monitorAnySensorSignal2contact6.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.40418.2.4.3.5.1 i <value>

Start monitoring NAG SNR-ERD-3s environmental relay/alarm device (sensor/relay contact and alarm-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-3s::monitorAnySensorSignal2contact6 OID value, configure state conditions and alerts, and monitor any NAG SNR-ERD-3s environmental relay/alarm device (sensor/relay contact and alarm-count status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.40418snrSNR-ERD-2
1.3.6.1.4.1.40418.2snr_erdSNR-ERD-2
Numeric OIDNameModule
1.3.6.1.4.1.40418.2.4snr_erd_3sSNR-ERD-3s
1.3.6.1.4.1.40418.2.4.3sensesSet1SNR-ERD-3s
1.3.6.1.4.1.40418.2.4.3.5monitorAnySensorSignal2contact6SNR-ERD-3s