All MIBs › SNR-ERD-3s › monitorAlarmSignal1Contact8
monitorAlarmSignal1Contact8
Module: SNR-ERD-3s
OID (symbolic): SNR-ERD-3s::monitorAlarmSignal1Contact8
OID (numeric): 1.3.6.1.4.1.40418.2.4.3.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: qwerty
What is monitorAlarmSignal1Contact8?
Reports/sets the state of the door-alarm input wired to contact 8: sensorOff(0)/sensorOn(3) indicate whether the sensor is active, and doorIsClose(1)/doorIsOpen(2) report the door's current position.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40418.2.4.3.1 snmpwalk -v2c -c public <target> SNR-ERD-3s::monitorAlarmSignal1Contact8
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40418.2.4.3.1.1 snmpget -v2c -c public <target> SNR-ERD-3s::monitorAlarmSignal1Contact8.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.40418.2.4.3.1.1 i <value>
Start monitoring NAG SNR-ERD-3s environmental relay/alarm device (sensor/relay contact and alarm-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNR-ERD-3s::monitorAlarmSignal1Contact8 OID value, configure state conditions and alerts, and monitor any NAG SNR-ERD-3s environmental relay/alarm device (sensor/relay contact and alarm-count status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.40418 | snr | SNR-ERD-2 |
| 1.3.6.1.4.1.40418.2 | snr_erd | SNR-ERD-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40418.2.4 | snr_erd_3s | SNR-ERD-3s |
| 1.3.6.1.4.1.40418.2.4.3 | sensesSet1 | SNR-ERD-3s |
| 1.3.6.1.4.1.40418.2.4.3.1 | monitorAlarmSignal1Contact8 | SNR-ERD-3s |