SNMP540-ALARM-MIB :: snmp540GeneralIntegrationTime

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SNMP540-ALARM-MIB › snmp540GeneralIntegrationTime

snmp540GeneralIntegrationTime

Module: SNMP540-ALARM-MIB

OID (symbolic): SNMP540-ALARM-MIB::snmp540GeneralIntegrationTime

OID (numeric): 1.3.6.1.4.1.498.8.4.10.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This is the DDS Alarm Threshold Interval. It specifies the amount of time, 1 to 15 minutes, in which the threshold setting is to be exceeded for the alarm to occur.

What is snmp540GeneralIntegrationTime?

This object sets the DDS Alarm Threshold Interval, the amount of time from 1 to 15 minutes during which a threshold setting must be exceeded for an alarm to actually occur. Admins tune it to control how sustained a fault condition must be before it's reported as an alarm, filtering out brief transients. Setting snmp540GeneralIntegrationTime to 5 means a threshold breach must persist for five minutes before the corresponding alarm fires.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.8.4.10.4
snmpwalk -v2c -c public <target> SNMP540-ALARM-MIB::snmp540GeneralIntegrationTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.498.8.4.10.4.1
snmpget -v2c -c public <target> SNMP540-ALARM-MIB::snmp540GeneralIntegrationTime.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.498.8.4.10.4.1 i <value>

Start monitoring SNMP 540-series remote alarm/environmental monitoring unit, telecom equipment shelter/cabinet monitoring hardware (alarm table status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNMP540-ALARM-MIB::snmp540GeneralIntegrationTime OID value, configure state conditions and alerts, and monitor any SNMP 540-series remote alarm/environmental monitoring unit, telecom equipment shelter/cabinet monitoring hardware (alarm table status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.498gdcDMA200-MIB
1.3.6.1.4.1.498.8dsuDDS-MIB
1.3.6.1.4.1.498.8.4snmp540SNMP540-MGMT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.498.8.4.10snmp540AlarmSNMP540-ALARM-MIB
1.3.6.1.4.1.498.8.4.10.4snmp540GeneralIntegrationTimeSNMP540-ALARM-MIB