All MIBs › SNMP-UPS-MIB › testDiag
testDiag
Module: SNMP-UPS-MIB
OID (symbolic): SNMP-UPS-MIB::testDiag
OID (numeric): 1.3.6.1.3.9999.8.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this variable to 'start' will initiate the diagnostics test. Setting this variable to 'abort' will stop the diagnostics test if the test is in-progress, otherwise it has no effect. Reading this variable will return zero.
What is testDiag?
Writing start(1) kicks off the UPS's general diagnostics test, and writing abort(2) stops one already in progress (or does nothing if none is running); reading this object always returns zero, so check testDiagStatus for the result.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.9999.8.3 snmpwalk -v2c -c public <target> SNMP-UPS-MIB::testDiag
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.9999.8.3.1 snmpget -v2c -c public <target> SNMP-UPS-MIB::testDiag.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.3.9999.8.3.1 i <value>
Start monitoring legacy SNMP-managed UPS (Uninterruptible Power Supply) equipment (battery/input/output power status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNMP-UPS-MIB::testDiag OID value, configure state conditions and alerts, and monitor any legacy SNMP-managed UPS (Uninterruptible Power Supply) equipment (battery/input/output power status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| 1.3.6.1.3.9999 | mplsCemMIB | MPLS-CEM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.9999.8 | test | SNMP-UPS-MIB |
| 1.3.6.1.3.9999.8.3 | testDiag | SNMP-UPS-MIB |