All MIBs › SNMP-REPEATER-MIB › rptrMonitorPortHCReadableOctets
rptrMonitorPortHCReadableOctets
Module: SNMP-REPEATER-MIB
OID (symbolic): SNMP-REPEATER-MIB::rptrMonitorPortHCReadableOctets
OID (numeric): 1.3.6.1.2.1.22.2.3.2.1.4
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: This object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which has been determined to be a readable frame (i.e., including FCS octets but excluding framing bits and dribble bits).
This statistic provides an indicator of the total data transferred.
This counter is a 64-bit version of rptrMonitor- PortReadableOctets. It should be used by network management protocols which suppport 64-bit counters (e.g. SNMPv2).
Conformance clauses for this MIB are defined such that implementation of this object is not required in a system which does not support 100Mb/s. However, systems with mixed 10 and 100Mb/s ports may implement this object across all ports, including 10Mb/s. If this object is implemented, it must be according to the definition in the first paragraph of this description; that is, the value of this object MUST be a valid count.
A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes.
What is rptrMonitorPortHCReadableOctets?
The 64-bit (high-capacity) version of the readable-octets counter for this port, intended for SNMPv2+ management stations so a busy 100Mb/s port's byte count doesn't wrap around between polls the way the 32-bit counter can.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.22.2.3.2.1.4 snmpwalk -v2c -c public <target> SNMP-REPEATER-MIB::rptrMonitorPortHCReadableOctets
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.22.2.3.2.1.4.1 snmpget -v2c -c public <target> SNMP-REPEATER-MIB::rptrMonitorPortHCReadableOctets.1
Start monitoring vendor-neutral, standards-based MIB, IEEE 802.3 Ethernet repeater/hub device (repeater/port operational status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNMP-REPEATER-MIB::rptrMonitorPortHCReadableOctets OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, IEEE 802.3 Ethernet repeater/hub device (repeater/port operational status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.22 | snmpDot3RptrMgt | LANART-AGENT |
| 1.3.6.1.2.1.22.2 | rptrMonitorPackage | LANART-AGENT |
| 1.3.6.1.2.1.22.2.3 | rptrMonitorPortInfo | LANART-AGENT |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.22.2.3.2 | rptrMonitor100PortTable | SNMP-REPEATER-MIB |
| 1.3.6.1.2.1.22.2.3.2.1 | rptrMonitor100PortEntry | SNMP-REPEATER-MIB |
| 1.3.6.1.2.1.22.2.3.2.1.4 | rptrMonitorPortHCReadableOctets | SNMP-REPEATER-MIB |