All MIBs › SNMP-REPEATER-MIB › rptrMonHCTotalOctets
rptrMonHCTotalOctets
Module: SNMP-REPEATER-MIB
OID (symbolic): SNMP-REPEATER-MIB::rptrMonHCTotalOctets
OID (numeric): 1.3.6.1.2.1.22.2.4.2.1.2
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: The total number of octets contained in the valid frames that have been received on the ports in this group. If a implementation can not obtain a count of octets as seen by the repeater itself, this counter may be the summation of the values of the rptrMonitorPortReadableOctets counters for all of the ports in the group.
This statistic provides an indicator of the total data transferred.
This counter is a 64-bit (high-capacity) version of rptrMonUpper32TotalOctets and rptrMonTotalOctets. It should be used by network management protocols which support 64-bit counters (e.g. SNMPv2).
Conformance clauses for this MIB are defined such that implementation of this object is not required in a system which does not support 100Mb/s. However, systems with mixed 10 and 100Mb/s ports may implement this object across all ports, including 10Mb/s. If this object is implemented, it must be according to the definition in the first paragraph of this description; that is, the value of this object MUST be a valid count.
What is rptrMonHCTotalOctets?
The 64-bit high-capacity version of the total octets received across all ports of this repeater, intended for SNMPv2+ stations so admins don't need to combine two 32-bit counters to track traffic on a busy 100Mb/s repeater.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.22.2.4.2.1.2 snmpwalk -v2c -c public <target> SNMP-REPEATER-MIB::rptrMonHCTotalOctets
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.22.2.4.2.1.2.1 snmpget -v2c -c public <target> SNMP-REPEATER-MIB::rptrMonHCTotalOctets.1
Start monitoring vendor-neutral, standards-based MIB, IEEE 802.3 Ethernet repeater/hub device (repeater/port operational status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNMP-REPEATER-MIB::rptrMonHCTotalOctets OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, IEEE 802.3 Ethernet repeater/hub device (repeater/port operational status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.22 | snmpDot3RptrMgt | LANART-AGENT |
| 1.3.6.1.2.1.22.2 | rptrMonitorPackage | LANART-AGENT |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.22.2.4 | rptrMonitorAllRptrInfo | SNMP-REPEATER-MIB |
| 1.3.6.1.2.1.22.2.4.2 | rptrMon100Table | SNMP-REPEATER-MIB |
| 1.3.6.1.2.1.22.2.4.2.1 | rptrMon100Entry | SNMP-REPEATER-MIB |
| 1.3.6.1.2.1.22.2.4.2.1.2 | rptrMonHCTotalOctets | SNMP-REPEATER-MIB |