SNMP-REPEATER-MIB :: rptrInfoLastChange

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsSNMP-REPEATER-MIBrptrInfoLastChange

rptrInfoLastChange

Module: SNMP-REPEATER-MIB

OID (symbolic): SNMP-REPEATER-MIB::rptrInfoLastChange

OID (numeric): 1.3.6.1.2.1.22.1.4.1.1.6

Node type: OBJECT-TYPE

Type: TimeStamp

Access: read-only

Description: The value of sysUpTime when any of the following conditions occurred: 1) agent cold- or warm-started; 2) this instance of repeater was created

(such as when a device or module was added to the system); 3) a change in the value of rptrInfoOperStatus; 4) ports were added or removed as members of the repeater; or 5) any of the counters associated with this repeater had a discontinuity.

What is rptrInfoLastChange?

This read-only object records the system uptime value at the last significant change to the repeater device, such as status changes, port additions/removals, or counter resets. It uses a timestamp to mark when the last operational change occurred. An operator would use this timestamp to correlate repeater configuration changes with network events and to verify when the repeater was last modified or restarted.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.22.1.4.1.1.6
snmpwalk -v2c -c public <target> SNMP-REPEATER-MIB::rptrInfoLastChange

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.22.1.4.1.1.6.1
snmpget -v2c -c public <target> SNMP-REPEATER-MIB::rptrInfoLastChange.1

Start monitoring vendor-neutral, standards-based MIB, IEEE 802.3 Ethernet repeater/hub device (repeater/port operational status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNMP-REPEATER-MIB::rptrInfoLastChange OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, IEEE 802.3 Ethernet repeater/hub device (repeater/port operational status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.22snmpDot3RptrMgtLANART-AGENT
1.3.6.1.2.1.22.1rptrBasicPackageLANART-AGENT
Numeric OIDNameModule
1.3.6.1.2.1.22.1.4rptrAllRptrInfoSNMP-REPEATER-MIB
1.3.6.1.2.1.22.1.4.1rptrInfoTableSNMP-REPEATER-MIB
1.3.6.1.2.1.22.1.4.1.1rptrInfoEntrySNMP-REPEATER-MIB
1.3.6.1.2.1.22.1.4.1.1.6rptrInfoLastChangeSNMP-REPEATER-MIB