All MIBs › SNMP-REPEATER-MIB › rptrAddrTrackCapacity
rptrAddrTrackCapacity
Module: SNMP-REPEATER-MIB
OID (symbolic): SNMP-REPEATER-MIB::rptrAddrTrackCapacity
OID (numeric): 1.3.6.1.2.1.22.3.3.1.1.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The maximum number of addresses that can be detected on this port. This value indicates to the maximum number of entries in the rptrExtAddrTrackTable relative to this port.
If this object has the value of 1, the agent implements only the LastSourceAddress mechanism described by RFC 1368 or RFC 1516.
What is rptrAddrTrackCapacity?
This object specifies the maximum number of MAC addresses that can be detected and tracked on a repeater port, indicating the size capacity of the address tracking table for that port. It helps an operator understand the management agent's ability to monitor source addresses; if the value is 1, only the most recent source address (LastSourceAddress mechanism) is tracked. Operators check this during network planning to determine address tracking capabilities when monitoring Ethernet repeaters and hubs.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.22.3.3.1.1.6 snmpwalk -v2c -c public <target> SNMP-REPEATER-MIB::rptrAddrTrackCapacity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.22.3.3.1.1.6.1 snmpget -v2c -c public <target> SNMP-REPEATER-MIB::rptrAddrTrackCapacity.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rptrAddrTrackCapacity.1
Start monitoring vendor-neutral, standards-based MIB, IEEE 802.3 Ethernet repeater/hub device (repeater/port operational status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNMP-REPEATER-MIB::rptrAddrTrackCapacity OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, IEEE 802.3 Ethernet repeater/hub device (repeater/port operational status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.22 | snmpDot3RptrMgt | LANART-AGENT |
| 1.3.6.1.2.1.22.3 | rptrAddrTrackPackage | LANART-AGENT |
| 1.3.6.1.2.1.22.3.3 | rptrAddrTrackPortInfo | LANART-AGENT |
| 1.3.6.1.2.1.22.3.3.1 | rptrAddrTrackTable | LANART-AGENT |
| 1.3.6.1.2.1.22.3.3.1.1 | rptrAddrTrackEntry | LANART-AGENT |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.22.3.3.1.1.6 | rptrAddrTrackCapacity | SNMP-REPEATER-MIB |