SNA-SDLC-MIB :: sdlcLSStatsRetransmitsIn

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsSNA-SDLC-MIBsdlcLSStatsRetransmitsIn

sdlcLSStatsRetransmitsIn

Module: SNA-SDLC-MIB

OID (symbolic): SNA-SDLC-MIB::sdlcLSStatsRetransmitsIn

OID (numeric): 1.3.6.1.2.1.41.1.2.3.1.39

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: This object reflects the total number of information frames retransmitted by the remote link station because the N(s) received from that link station indicated that one or more information frames sent by that station were lost. This event causes the first missing information frame of a window and all subsequent information frames to be retransmitted. At link station startup time, this object must be initialized to zero.

Management: If the value of sdlcLSStatsRetransmitsIn grows over time, then the quality of the serial line is in question. You might want to look at decreasing the value for sdlcLSAdminMAXDATASend to compensate for the lower quality line.

What is sdlcLSStatsRetransmitsIn?

This counter, reset to zero at link station startup, tracks I-frames the remote link station had to retransmit because it detected (via N(s)) that frames it sent were lost; the MIB itself notes that a growing value here points to poor serial line quality and suggests lowering sdlcLSAdminMAXDATASend to compensate.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.41.1.2.3.1.39
snmpwalk -v2c -c public <target> SNA-SDLC-MIB::sdlcLSStatsRetransmitsIn

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.41.1.2.3.1.39.1
snmpget -v2c -c public <target> SNA-SDLC-MIB::sdlcLSStatsRetransmitsIn.1

Start monitoring standards-compliant SNA/SDLC gateway equipment (SDLC port configuration/fault status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNA-SDLC-MIB::sdlcLSStatsRetransmitsIn OID value, configure state conditions and alerts, and monitor any standards-compliant SNA/SDLC gateway equipment (SDLC port configuration/fault status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.41snaDLCNETLINK-SPECIFIC-MIB
1.3.6.1.2.1.41.1sdlcNETLINK-SPECIFIC-MIB
1.3.6.1.2.1.41.1.2sdlcLSGroupNETLINK-SPECIFIC-MIB
Numeric OIDNameModule
1.3.6.1.2.1.41.1.2.3sdlcLSStatsTableSNA-SDLC-MIB
1.3.6.1.2.1.41.1.2.3.1sdlcLSStatsEntrySNA-SDLC-MIB
1.3.6.1.2.1.41.1.2.3.1.39sdlcLSStatsRetransmitsInSNA-SDLC-MIB