All MIBs › SMARTNODE-MIB › uploadExecute
uploadExecute
Module: SMARTNODE-MIB
OID (symbolic): SMARTNODE-MIB::uploadExecute
OID (numeric): 1.3.6.1.4.1.1768.100.3.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Starts configuration upload via TFTP. 0 noOp 1 uploadConfiguration
What is uploadExecute?
Setting this to uploadConfiguration(1) starts a TFTP upload of the device's running configuration to the server named in uploadTftpServerAddress/Path; noOp(0) is the idle/no-action value.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1768.100.3.1.1 snmpwalk -v2c -c public <target> SMARTNODE-MIB::uploadExecute
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1768.100.3.1.1.1 snmpget -v2c -c public <target> SMARTNODE-MIB::uploadExecute.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1768.100.3.1.1.1 i <value>
Start monitoring Patton Electronics SmartNode VoIP gateway equipment (firmware version/TFTP upgrade status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SMARTNODE-MIB::uploadExecute OID value, configure state conditions and alerts, and monitor any Patton Electronics SmartNode VoIP gateway equipment (firmware version/TFTP upgrade status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1768 | patton | SMARTNODE-MIB |
| 1.3.6.1.4.1.1768.100 | smartnode | SMARTNODE-MIB |
| 1.3.6.1.4.1.1768.100.3 | config | SMARTNODE-MIB |
| 1.3.6.1.4.1.1768.100.3.1 | startupConfigUpload | SMARTNODE-MIB |
| 1.3.6.1.4.1.1768.100.3.1.1 | uploadExecute | SMARTNODE-MIB |