All MIBs › SMARTD-MIB › smartIfExtensionBridgeEnable
smartIfExtensionBridgeEnable
Module: SMARTD-MIB
OID (symbolic): SMARTD-MIB::smartIfExtensionBridgeEnable
OID (numeric): 1.3.6.1.4.1.81.27.3.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Valid for Ethernet port when in sniffer mode.
What is smartIfExtensionBridgeEnable?
For an Ethernet port running in sniffer mode, reports whether bridging is enabled or disabled on it (or notSupported if not applicable).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.27.3.1.1.5 snmpwalk -v2c -c public <target> SMARTD-MIB::smartIfExtensionBridgeEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.81.27.3.1.1.5.1 snmpget -v2c -c public <target> SMARTD-MIB::smartIfExtensionBridgeEnable.1
Start monitoring any server/NAS/workstation running smartmontools' smartd, SATA/SAS/SCSI hard disk or SSD storage (SMART disk health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SMARTD-MIB::smartIfExtensionBridgeEnable OID value, configure state conditions and alerts, and monitor any any server/NAS/workstation running smartmontools' smartd, SATA/SAS/SCSI hard disk or SSD storage (SMART disk health) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.81 | lannet | GEN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.81.27 | smartDevices | SMARTD-MIB |
| 1.3.6.1.4.1.81.27.3 | smartIfExtension | SMARTD-MIB |
| 1.3.6.1.4.1.81.27.3.1 | smartIfExtensionTable | SMARTD-MIB |
| 1.3.6.1.4.1.81.27.3.1.1 | smartIfExtensionEntry | SMARTD-MIB |
| 1.3.6.1.4.1.81.27.3.1.1.5 | smartIfExtensionBridgeEnable | SMARTD-MIB |