All MIBs › SLED-MIB › sledPktGenTrigger
sledPktGenTrigger
Module: SLED-MIB
OID (symbolic): SLED-MIB::sledPktGenTrigger
OID (numeric): 1.3.6.1.4.1.4491.2.1.13.1.3.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object controls the packet generation. Setting this object to 'start' causes the packet generation to begin. Reading this object will return 'start' if a packet generation is in progress, otherwise it will return 'stop'. Setting this object to 'stop' while packet generation is in progress aborts the packet generation. Setting this object to 'start' while packet generation is in progress, 'wrongValue' is returned.
What is sledPktGenTrigger?
Setting this object to start(1) begins SLED packet generation using the configured payload, rate, and count; reading it returns start while generation is in progress and stop otherwise, and setting start again mid-generation returns wrongValue, while setting stop(2) aborts an in-progress run. Admins use it as the actual on/off control for a configured packet-generation test. For example, after configuring payload, rate, and packet count, an admin sets sledPktGenTrigger to start to launch the diagnostic burst toward the CPE.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.13.1.3.5 snmpwalk -v2c -c public <target> SLED-MIB::sledPktGenTrigger
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.13.1.3.5.1 snmpget -v2c -c public <target> SLED-MIB::sledPktGenTrigger.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.13.1.3.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> sledPktGenTrigger.1
Start monitoring eDOCSIS-embedded cable device, e.g. cable modem/eMTA with embedded application (loopback diagnostic test config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SLED-MIB::sledPktGenTrigger OID value, configure state conditions and alerts, and monitor any eDOCSIS-embedded cable device, e.g. cable modem/eMTA with embedded application (loopback diagnostic test config) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.13 | sledMib | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.13.1 | sledMibObjects | SLED-MIB |
| 1.3.6.1.4.1.4491.2.1.13.1.3 | sledPktGen | SLED-MIB |
| 1.3.6.1.4.1.4491.2.1.13.1.3.5 | sledPktGenTrigger | SLED-MIB |