All MIBs › SLAPM-MIB › slapmPRMonMaxDelayLow
slapmPRMonMaxDelayLow
Module: SLAPM-MIB
OID (symbolic): SLAPM-MIB::slapmPRMonMaxDelayLow
OID (numeric): 1.3.6.1.3.88.1.2.6.1.15
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: The threshold for generating a slapmPolicyRuleMonOkay notification, signalling that a monitored maximum delay rate has fallen to an acceptable level.
A value of zero for this object is returned when the slapmPRMonControl monitorMaxDelay(4) is not enabled. When enabled the default value for this object is the max delay value specified in the associated action definition minus 10%. If the action definition doesn't have a max delay defined then there is no default for this object and a value MUST be specified prior to activating this entry when monitorMaxDelay(4) is selected.
Note: The corresponding slapmPRMonControl BITS setting, enableAggregateTraps(3), MUST be selected in order for any notification relating to this entry to potentially be generated.
What is slapmPRMonMaxDelayLow?
Sets the recovery threshold below which measured delay must fall before an okay notification clears a prior delay violation for this policy rule, defaulting to the configured maximum delay minus 10%.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.88 | slapmMIB | SLAPM-MIB |
| 1.3.6.1.3.88.1 | slapmObjects | SLAPM-MIB |
| 1.3.6.1.3.88.1.2 | slapmTableObjects | SLAPM-MIB |
| 1.3.6.1.3.88.1.2.6 | slapmPRMonTable | SLAPM-MIB |
| 1.3.6.1.3.88.1.2.6.1 | slapmPRMonEntry | SLAPM-MIB |
| 1.3.6.1.3.88.1.2.6.1.15 | slapmPRMonMaxDelayLow | SLAPM-MIB |