All MIBs › SL81-STD-MIB › esIndexES
esIndexES
Module: SL81-STD-MIB
OID (symbolic): SL81-STD-MIB::esIndexES
OID (numeric): 1.3.6.1.4.1.3052.5.1.1.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The part of the point index that refers to an EventSensor.
The point index is a string of 3 numbers separated by periods. It contains all the information necessary for getting a piece of data off an event sensor; namely, which EventSensor, point class, and which-sensor-of-that-class (a.k.a. point).
This object's allowable values are 1 through 16, and 200. 200 always refers to the EventSensor inside the unit. 1 through 16 refer to additional attached EventSensors.
The number corresponding to an EventSensor is determined by the user at the initial configuration time. If there is an internal sensor in the unit, it will always be the first item in the Sensor Events setup menu.
For example, if a new EventSensor is configured as the 2nd entry AFTER the internal EventSensor (if one exists) in the Sensor Events Setup Menu, then that EventSensor will be known from then on as EventSensor 2. All point indeces with esIndexES=2 will now refer to that particular EventSensor.
What is esIndexES?
The part of a 3-number point index that identifies which physical EventSensor (an environmental monitoring accessory) a reading belongs to. Values 1-16 identify additional attached EventSensors, while 200 always refers to the sensor built into the unit itself, with numbering assigned in the order sensors were added in the setup menu.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.5.1.1.1.1.1 snmpwalk -v2c -c public <target> SL81-STD-MIB::esIndexES
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.5.1.1.1.1.1.1 snmpget -v2c -c public <target> SL81-STD-MIB::esIndexES.1
Start monitoring Asentria SL81-series remote site monitoring device (environmental sensor point/alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SL81-STD-MIB::esIndexES OID value, configure state conditions and alerts, and monitor any Asentria SL81-series remote site monitoring device (environmental sensor point/alarm status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.5 | sl81 | SL81-STD-MIB |
| 1.3.6.1.4.1.3052.5.1 | status | SL81-STD-MIB |
| 1.3.6.1.4.1.3052.5.1.1 | eventSensorStatus | SL81-STD-MIB |
| 1.3.6.1.4.1.3052.5.1.1.1 | esPointTable | SL81-STD-MIB |
| 1.3.6.1.4.1.3052.5.1.1.1.1 | esPointEntry | SL81-STD-MIB |
| 1.3.6.1.4.1.3052.5.1.1.1.1.1 | esIndexES | SL81-STD-MIB |